RESERVED AREA
EN
IT
STORE
PRODUCTS
DOCUMENTATION
PICTURES
SW/FW DOWNLOAD
CONTACTS
FAQ
NEWSLETTER
DOCUMENTATION
FREQUENTLY ASKED QUESTIONS
< MAIN LIST
RACESTUDIO 3
CONFIGURATIONS
How can I obtain the file of the saved configurations in the RaceStudio 3 list?
EXPORT DATA
How can I export logged data from RaceStudio 3 and RS2 Analysis?
MEASURE PROTECTION KEYS
Can lock my device configuration settings to avoid being modified?
PCS HARDWARE TECHNICAL SPECS
Which hardware specifications are mandatory for my PC, in order to make the AiM software work without errors or slowdowns?
RACESTUDIO 3 START UP
The software shows problems while starting up: how can I proceed?
START PAGE MANAGEMENT
How can I configure a Custom Logo on the main page of RaceStudio 3 during the Start Up?
INPUT DATA
CHANNELS INPUT/CUSTOM SENSORS
How can I configure a generic fuel level sensor with RS3?
How can I obtain the information referred to the used fuel during each session?
How do I configure the alarm sensor with RS3?
How do I configure the TPS potentiometer installed on my car/bike with RS3?
How do I have to calculate the value of the pull-up resistor which must be used when connecting a third-parties resistive sensor (i.e.: thermoresistors, VDO pressure/temperature sensors) to one of my AiM device channels?
ECU STREAM/CAN2 STREAM
How can I understand if the 120 Ohm resistance (included into the AiM devices) must be enabled/disabled?
Which effect does the device "Silent Mode" enabling/disabling have on the vehicle CAN Bus?
How can I obtain the information referred to the used fuel during each session?
What is a Bitfield channel? How can I create, configure and manage a Bitfield channel with AiM devices?
How the values of a Bitfield channel are displayed on AiM devices and on RaceStudio 3 Live Measures mode and RaceStudio Analysis?
REALTIME DATA MANAGEMENT AND OUTPUT ACTIONS
CAN OUTPUT
How do I have to set my AiM system to transmit data to an external CAN device?
DISPLAY
How can I customize my display pages so that I can have better references while driving?
ICONS MANAGER
How can I create and configure an icon so that I can display it on my device?
MATH CHANNELS
How can I use mathematical channels and how should I interpret their calculated values?
PARAMETERS
My AiM logger records not valid data (i.e.: warm-up phase, access to the track): how can I modify its recording strategies?
My lap times are split into two parts. What’s the problem and how to solve it?
SHIFT LIGHTS AND ALARMS
What kind of alarm can I set and display on my AiM device through RaceStudio 3?
STATUS VARIABLES
What is a Status Variable and how can I use it in my configuration?
TRIGGER COMMANDS
How can I automatically display the image of the mirror camera connected to my AiM device if reverse gear CAN messages or gear position signals are not available?
How can I automatically scroll my display pages while driving, for example using my steering wheel pushbuttons, without using the device buttons?
DEVICES - LIVE OPERATIONS
DOWNLOAD SETTINGS
How can I set RS3 Data Download?
How RaceStudio 3 manages the recorded session into the AiM devices?
Once data downloading is started, this does not end correctly and the software displays an error message: how should I proceed?
LIVE MEASURES - CHECK AND CALIBRATIONS
How can I verify that my device alarms/icons are correctly configured, even if I cannot test them directly on my vehicle?
LOGO MANAGEMENT
How can I configure a Logo on my TFT device?
ODOMETERS MANAGEMENT
How can I manage the system odometers with RS3?
WI-FI/USB COMMUNICATIONS AND WEB UPDATES
When I connect my AiM device to my PC they do not communicate: why?
How can I protect my device Wi-Fi access?
RaceStudio 3 does not automatically download the available Web Updates: how can I solve this problem?
TRACKS AND LAP TIMES
How can I add split to the track?
How can I add the map of the circuit I am racing on to the RaceStudio 3 Tracks list, if it is not available or it is available but with a different layout?
How can I obtain my session lap times, if the circuit will race on is not present in RaceStudio 3 “Tracks” section database?
MOVIES CONFIGURATION
How can I compare two recorded movies with SmartyCam HD/GP HD?
VIDEO RECOVERY
How can I recover my damaged movie?
< Back