Taipan

2026

0.5.54 - March, 10th 2026

Changes

  • Corrected management of DUCATI Desmo450 MX OEM handlebar switch

2025

0.5.53 - November, 3rd 2025

Changes

  • Added DUCATI Desmo450 MX bike support

0.5.47 - June, 20th 2025

Changes

  • Added support of new CAN - BT module

0.5.46 - May, 15th 2025

Changes

  • Fixed a bug related to missmanagement of all Husqvarna FE MY25 and GasGas EC MY25

0.5.44 - March, 12th 2025

Changes

  • Added management of purge valve on Honda 450 X , KTM EXC-F models and Husqvarna FE models

  • Added management of p_pair valveon Honda 450 X model

  • Fixed management of main relay of Honda 450 X model

  • Corrected a bug related to second injector management of Kawasaki KX 250 models from MY22

0.5.43 - March, 3th 2025

Changes

  • Added 2025 Bike Model Management

  • Added Management of new HBS2

  • Added MAP Led feedback for LC strategy for Honda 450 from MY21 and 250 from MY22 ,and Kawasaki 450 from MY24 and 250 from MY25

  • Added Speed Limiter strategy for MotoStudent MY23 project (Map Update needed)

  • Enable second injector during LC if is configured

2024

0.5.40 - September, 4th 2024

Changes

  • Added limp home strategy.

0.5.39 - May, 10th 2024

Changes

  • Fixed a bug ralted to bad management of stock KTM Husqvarna GasGas handlebar switch.

0.5.38 - April, 18th 2024

Changes

  • Added management of QS for GasGas MC 250 450 MY 2024.

  • Added support of Kawasaki KX 450 250 MY 2024.

  • Ignored fuel trim correctrion at engine idle condition.

0.5.36 - January, 13th 2024

Changes

  • Corrected a bug ralted to forcing usage of automatic calculation strategy in case of fault of external barometric sensor.

  • Fixed a bug related to mil light mishandling during fast transition of power off and on the bike

2023

0.5.35 - December, 14th 2023

Changes

  • Forced usage of automatic calculation strategy in case of fault of external barometric sensor.

0.5.34 - September, 19th 2023

Changes

  • Added map change event to software. Available this feature from ver : 1.2.56.0 of Spark

0.5.33 - July, 28th 2023

Changes

  • Add possibility to configure Spare channels input for barometric pressure calculation

0.5.32 - June, 29th 2023

Changes

  • Changed the management of handle bar heater made by spare channel output

  • Fix a bug related to quick shift engagement with Aim handle bar switch connected on ktm and husqvarna from MY23

0.5.30 - April, 13th 2023

Changes

  • Added electric water pump management. Compliant only with : BOSCH PWM (code 0 392 023 232) or (code 0 392 023 454)

  • Added quick shifter sensitivity management for KTM SX-F MY23

  • Added quick shift management also in transition from 1st to 2nd gear for KTM SX-F MY23

0.5.29 - February, 24th 2023

Changes

  • Added quick shifter button sensitivity management

  • Added quick shifter operation mode selection

  • Added barometric offset value compensation during automatic mode

0.5.28 - February, 6th 2023

Changes

  • Fix a bug related to TPS calibration procedure on Honda RL/L models.

  • Improved barometric pressure calculation

  • Managed 1.4 hardware

  • Increased reading frequencies of drop sensor

0.5.27 - January, 12th 2023

Changes

  • Fix a bug related to MIL signalation of TPS calibration procedure

  • Intruduced fuel pump prime for all Honda CRF RL/L models. Need to be updated also tha file project

2022

0.5.26 - December, 21th 2022

Changes

  • Added support of Honda CRF 450 X model

  • Fixed a bug related to crank correction that appear when UC bridge was connected to ECU

  • Optimized automatic barometic calculation algorithm

  • Fixed a bug related to manual throttle calibration on bike that has external power on key

0.5.24 - October, 28th 2022

Changes

  • Add support of MY 2023 bike

  • Insert the possibility to bypass quickshift cut with 0 value entry in quickshift time table

0.5.23 - September, 2nd 2022

Changes

  • Add Honda CRF 450 L throttle calibration feature

0.5.22 - July, 28th 2022

Changes

  • Fixed a bug that did not allow the manual throttle calibration on the bike

0.5.21 - July, 21th 2022

Changes

  • Add RPM compensation table for injection transient correction

  • Add two position map switch management

  • Improved ecu temeprature calculation

  • Improved analog sensors reading

0.5.20 - July, 6th 2022

Changes

  • Improved management of HBS switch communication

0.5.19 - June, 10th 2022

Changes

  • Add management of the new ktm 22.5 handle bar switch

  • Introduced one shot barometric pressure calculation option

  • Introducet Mil light fault code management

  • Disable throttle calibration on-bike for KTM / Husqvarna enduro bike models

0.5.17 - May, 03rd 2022

Changes

  • Add Fuel level consumption calculation for Honda 450L models

  • Corrected the management of launch control in Neutral strategy

  • Add speed density usage flag

  • Filtered channels of air temperature and water temperature measures at 1Hz

  • Correct the managemnt of fuel pump re-arm

0.5.16 - February, 28th 2022

Changes

  • Introduced side stand engine off strategy for Honda 450L model

0.5.15 - February, 15th 2022

Changes

  • Validated traction control startegy intervention

  • Add management of Honda CRF 450L model

  • Add user injection and ignition tables

2021

0.5.14 - October, 10th 2021

Changes

  • Corrected Honda CRF LC engagement on 250 MY19-20-21 and 450 MY19-20

0.5.13 - September, 29th 2021

Changes

  • Update 2022 bike model management

  • Corrected Honda CRF led feedback during manual throttle calibration

0.5.12 - August, 06th 2021

Changes

  • Add Taipan ecu model in communication protocol