Facebook Instagram Linkedin
RESERVED AREA
US
AiM logo
HOME        PRODUCTS        DOCUMENTATION        PICTURES        SW/FW DOWNLOAD        CONTACTS        FAQ        NEWSLETTER
EPM08/EPM32
Add Power Outputs to your device
EPM08
EPM32
   LEDs
8 RGB LEDs + 1 EPM ON + 1 EPM STS (Status)
32 RGB LEDs + 1 EPM ON + 1 EPM STS (Status)
   Analog/digital
   inputs
6 fully configurable analog inputs
(0-5V; 0-12V) recorded at max 500 Hz each
Digital inputs pullup/pulldown
12 inputs
(8 configurable as analogic or digital, 4 digital only)
Up to 8 analogic inputs recorded at max 500 Hz each
Digital inputs pullup/pulldown
   Power outputs
1 with series diode rated up to 20 A (high side)
1 rated up to 25 A (high side)
6 rated up to 15 A (high side)
Protected for: over voltage, under voltage,
short circuit, over current, over temperature
All outputs have internal freewheeling diode
Total max current: 100 A
1 with series diode + 3 rated up to 20 A (high side)
12 rated up to 15 A (high side)
12 rated up to 10 A (high side)
4 rated up to 35 A
(high side/half bridge/low side/configurable)
Protected for: over voltage, under voltage,
short circuit, over current, over temperature
Total max current: 120 A
   Connectors
1 AMP connector + 1 Amphenol Surlok connector
2 AMP connectors + 1 Amphenol Surlok connector
   Body
Anodized Aluminum
   Dimensions
161x100.6x50.6 mm
234.4 x 95.1 x 49.0 mm
   Weight
370 g
740 g
EPM – Expansion Power Module adds power outputs to your installation.
Available in two versions:
EPM08 with 8 power outputs
EPM32 with 32 power outputs
The devices can be connected to the following AiM systems:
 
 
 
 
Connection example
EPMs & RaceStudio 3
From AiM RaceStudio 3 version 3.81.00 onwards, the EPMs are available as expansions
within the system configuration.
The configuration of all the devices mentioned above have now the same
user interface and capability for managing:
Alarms
Icons
Commands
Status variables
Additionally, the online view introduces several key improvements:
All your settings (unit of measure, forced values, etc.)
are now retained even after disconnecting or resetting
the device
Channels with associated labels (such as ON/OFF)
can be now forced by simply changing their numeric value
Power outputs - along with the associated channels, current, status
and activation - are now conveniently grouped in a single, easy-to-manage box.
Download RaceStudio 3