Facebook Instagram Linkedin
RESERVED AREA
US
AiM logo
HOME        PRODUCTS        DOCUMENTATION        PICTURES        SW/FW DOWNLOAD        CONTACTS        FAQ        NEWSLETTER
FREQUENTLY ASKED QUESTIONS
MX Series (MXL2, MXS, MXS Strada, MXP, MXP Strada, MXG, MXG Strada, MXT, MXT Strada, MXm)
CHANNELS
Which speed is taken as reference for the odometers travelled distance calculation?
COMPARISON
Which are the differences between MXS and MXS Strada?
COMPATIBILITY
Which GPS Module can I connect to my device to sample lap/split times and start finish line coordinates?
CONFIGURING
How can I connect my SmartyCam HD/GP HD with AiM devices and configure both?
How can I replicate my original instrumentation warning and indicator lamps once the signal has been connected to my AiM device channel?
In which way can I display gear information on my MXx/EVOx device?
The overlays of my SmartyCam video do not show the proper value, why?
What kind of alarms can I set on my MXx 1.2 device?
DOWNLOAD
What is the memory storage of the AiM MXx and EVOx devices and how many tests can I store into them?
ECU
How can I connect my AiM device to my vehicle engine control unit (ECU)?
How do I connect my AiM device to the vehicle OBDII connector?
(More info)
EXPANSIONS
How can I increase the number of my device analog channels?
How can I connect more expansion modules to my AiM device if the "CAN/EXP" cable (or EXP port on EVO4s) is already busy?
INTERFERENCE
Dash locks at the "crank".
ODOMETERS MANAGEMENT
How can I manage my MXL2 odometers?
How can I manage my MXG 1.2/MXS 1.2/MXP/MXG 1.2 Strada/MXS 1.2 Strada/MXP Strada odometers?
POWER SOURCE
How is it possible to protect an AiM device when it is powered on?
Are my AiM device grounds distinguished by type?
To which source can I connect my device to be able to correctly power it up?
SENSORS AND ALARM LEDS
How can I activate my MXS Strada (Street Icons version) alarm LEDs so to answer my car/bike signals?
I have an MXS1.2 Strada/MXG 1.2 Strada/MXP Strada with the optional Street Icon LEDs. How can I activate my Street Icon alarm LEDs according to my car/bike signals?
How can I connect a generic analog sensor to one of my AiM device analog channels?
How can I connect K type thermocouple sensors to my AiM MXx/EVOx device?
WI-FI
Go to the Wi-Fi section.
< Back