AiM SmartyCam - Accessories

SmartyCam can be installed using the following bracket kits:

V base kit (part number X90KSSMC0):

	1 V base (A) + straps

	1 60 mm single ball arm (B)

	1 Ball head (C)

	1 washer diameter 17.7mm, thickness 1.5mm, hole 6mm

Suction cup kit (part number X90KSSMC1):

	1 suction cup (A) + clamp base with ball

	1 60 mm single ball arm (B)

	1 Ball head (C)

	1 washer diameter 17.7mm, thickness 1.5mm, hole 6mm

Anti-vibration cot kit (part number X90KSSMCC):

V base + anti-vibration cot kit (part number X90KSSMC0C):

	1 V base (A) + straps

	1 60 mm single ball arm (B)

	1 Ball head (C)

	1 washer diameter 17.7mm, thickness 1.5mm, hole 6mm

	1 anti-vibration cot (D)

Suction cup + anti-vibration cot kit (part number X90KSSMC1C):

	1 suction cup (A) + clamp base with ball

	1 60 mm single ball arm (B)

	1 Ball head (C)

	1 washer diameter 17.7mm, thickness 1.5mm, hole 6mm

	1 anti-vibration cot (D)

Examples (V base and suction cup kit)

Use on smooth surfaces
(i.e. glass)

Use on roll-bar

Use on metal sheet

Examples of use (anti-vibration cot)

Use on smooth surfaces
(i.e. glass)

Use on roll-bar

Use on metal sheet

Note

Warning:
place the washer (2) included in the kit between SmartyCam (1) and the ball head (3).
Otherwise you could damage the camera.