Race Studio 3 Beta

3.59.45 - May 31st, 2023


  • 2023/05/31 Fix for an annoying messagebox wrongly shown.


  • 2023/05/31 MXm v2: fixed bug about maximum value of requested load of power outputs.

  • 2023/05/30 PDM Display: fixed bug in invalid channels warning icon.

  • 2023/05/30 Dash pages: improved preview for channel ‘not set’ in bargraph.

  • 2023/05/30 Display: corrected string shown in case of channel not set.


  • 2023/05/30 Some bug fixes to data report configurability.

3.59.39 - May 30th, 2023


  • 2023/05/29 Some fixes in data report while loading with no tracks or no splits division selected.

  • 2023/05/25 Data report tuned a little bit.

  • 2023/05/25 Bug fix: Split Report and Channels Report were wrongly scrolling to top line whenever a lap was enabled/disabled.

  • 2023/05/24 Fixed bad redraw during list scrolling.

  • 2023/05/18 Improvements in tech report.


  • 2023/05/29 Fix in RS3 installer executable that wrongly raised a release number message box.


  • 2023/05/29 MXm, MXm V2: added management of ACC expansion.

  • 2023/05/27 Alarms: fixed bug in master with alarms in dash expansion.

  • 2023/05/26 Fixed bug in cfg conversion.

  • 2023/05/25 Font management for upper and lower scale value labels of measure.

  • 2023/05/23 Managed new ACC expansion for SOLO2 DL,SOLO2 DL v2, EVO4S, EVO5.

  • 2023/05/23 Display Pages: added control preview when channel is not selected.

  • 2023/05/12 SmartyCam3 GP Pro: fixed config download when SD card was not insterted.

  • 2023/05/12 updated page p15i, p21i.

  • 2023/05/12 SmartyCam3 Dual: Fixed bug in GPS Pos Accuracy. Firmup 1.07.04 or newer is required.

  • 2023/05/12 Improved tech report computations.

  • 2023/05/11 Convertion of configuration from a device type to another compatible type (i.e. from SOLO 2 DL to SOLO 2 DL V2).

  • 2023/05/10 Fixed bug in showing warning icon for GPS Speed channel when opening a configuration.

  • 2023/05/10 Fixed bug on locked windows even when you have the protection key.


  • 2023/05/25 Fixed bug for which the tracks slist could result in being empty.

3.59.16 - May 8th, 2023


  • 3023/05/05 Fixed computation of time compare, that in some cases could result in not being computed correctly.

  • 3023/05/05 Modified split report so to display split times and distances also for disabled laps.

  • 3023/05/04 Added possibility to select laps with N best splits.

  • 3023/05/04 Added possibility to choose split (via icon) also in split report.

  • 3023/05/04 Fix in time/dist -> add split at cursor position: there were situations in which it didn’t work.

  • 3023/05/04 Fixed profiles general settings window.

  • 3023/05/02 Fixes in channels report colors (min/max/stats color not depending any more upon other colors).

  • 3023/05/02 Fixed misalignment of one lap while zooming in in distance based plots.

  • 3023/05/02 Fixed possible misbehaviors bound to a bad/missing conversion from ‘m’ to ‘ft’ in a very basic function of analysis engine.

  • 2023/04/28 Fixed plots of maps and time/dist in GPS Time mode.

  • 2023/04/27 Bug fix in management of distance in imperial units (there were some cases in which maps division wasn’t properly working).


  • 2023/05/04 Display: new page p21i, p20i, p201bc (firmup is required).

  • 2023/05/04 Display 10 inc: updated page p23iext (firmup is required).

  • 2023/05/04 GPS09c Open: RS-232 the base frequency can be selected with values of 25 and 20 Hz (before 25 and 10).

  • 2023/05/03 CAN output stream for SmartyCam3: fixed bug for transmission of signed channels.

  • 2023/04/29 Bug fix: AiM collections name is not matching the names shown in the GUI.

  • 2023/04/27 First management of Solo2 DL V2.

  • 2023/04/26 Added new pages with colorable bargraph.

3.59.06 - April 24th, 2023


  • 2023/04/20 Bug fix: there were cases in which connecting a SmartyCam3 it wasn’t recognized by RS3.

  • 2023/04/17 Secured the accesses to AiM server upon better startup verifications.


  • 2023/04/24 Bug fix for GPS09c Open Pro and SmartyCam 3 Dual: fixed name for type identification.

  • 2023/04/21 Bug fix for GPS09c Open Pro: fixed device image preview for item list.

  • 2023/04/21 Fixed bug about start recording condition of PDM configuration: when parameters were lost it was impossible to reconfigure them, by now RS3 add a default condition that user can modify.

  • 2023/04/20 Managed new device: GPS09c Open Pro.

  • 2023/04/20 Resouces dash 10 inch: updated page p23iext.

  • 2023/04/20 Dash Overlay: management of bargraph that can be user colored.


  • 2023/04/21 Improved sorting of slices in all panels and layouts.

  • 2023/04/20 Fixed sorting of slices in channels list (accordingly with time/distance plot tags).

  • 2023/04/20 Bug fix in proper naming of shown slices.

  • 2023/04/19 Bug fixes in the management of x and y axes in plots.

  • 2023/04/18 Allowed, via right click on a session, the opening in the same tab of sessions logged on different tracks.

  • 2023/04/17 Fixed export of lookup tables.

  • 2023/04/17 Fixed lookup table creation: it’s not allowing spaces any more in the table name (previously spaces were allowed, but the table couldn’t be called).

Web Updates

  • 2023/04/20 Fixed bug for which, upon insertion of a SC3 SD Card, the update button could result in being disabled.

  • 2023/04/19 Fixed web updates for SC3 GP PRO, that didn’t show the update icon even if a new piece of firmware is available.

3.58.13 - April 14th, 2023


  • 2023/04/14 Math channels application window shows a message upon recompute.

  • 2023/04/14 Fixed smart collections bug, for which the database wasn’t showing the correct sessions.

  • 2023/04/14 Fixed ‘Apply’ button behaviour in channels settings (redraws what needed).

  • 2023/04/12 Fixed off-track beacons for open circuits.

  • 2023/04/12 Open circuits are now visible in the list of nearby tracks when selecting the session track.

  • 2023/04/11 Fixed crash in analysis preview for a movie file from a session with no laps.

  • 2023/04/11 Fixed crash in LapEdgeCounter math channel computation.

  • 2023/04/11 Improved initialization of track candidates when opening the track map and sectors window.

Live View

  • 2023/04/14 SC3 is not showing accelerometers any more (they’re not in the hardware).


  • 2023/04/13 Fixed bug about locked features and protection keys.


  • 2023/04/12 While creating a new track, the map drawing zoom doesn’t reset any more moving from a lap foreward or backward.


  • 2023/04/11 Updated Japanese language.


  • 2023/04/11 Fixed bug for which the download from SC3 GP PRO internal memory couldn’t be working properly.

3.58.04 - April 7th, 2023


  • 2023/04/07 Updated list of special chars allowed in login password string.

  • 2023/04/06 Added options for exporting s3t files at higher frequencies, depending upon channels sampling frequencies.


  • 2023/04/07 Fixed bug in track selection, that didn’t properly work when the session has one only lap.

  • 2023/04/07 Fixed bug in split selection in split report. In time base it didn’t work, while in distance base the first click selected the split, another click on the same split moved to another (wrong) one.

  • 2023/04/07 Added flag to session row in split report, to allow selection/deselection of all laps.

  • 2023/04/06 Added possibility, in channels report, of deleting (clearing up) all items.

  • 2023/04/06 Some further fixes to logsheets units of measure.

  • 2023/04/06 Time/dist settings: renamed “On selected: min/max only for selected channels” into “On highlighted: min/max only for selected channels”.


  • 2023/04/07 Added new page “p20i” for 5 or 6 inches dashes.

3.57.99 - April 5th, 2023


  • 2023/04/05 Added management for SmartyCam3 Corsa, SmartyCam3 GP PRO, Solo2 v2.


  • 2023/04/05 Fixed s3t file format export, that didn’t correctly manage the time base (seconds vs milliseconds).

  • 2023/04/05 Track map icon fix: now it gets hidden if loaded sessions feature no GPS data.

  • 2023/04/05 Fixed RPM management in JR Drags Logsheets RPM values.

  • 2023/04/04 Some fixes to logsheets units of measure.

  • 2023/03/31 Added colors to distinguish axes in lookup tables definitions.

  • 2023/03/31 Lookup tables now allow also negative numbers.

  • 2023/03/31 Added default units for functions used in the LogSheets.

  • 2023/03/31 Fixed Channels Report values in case of report computed upon channels with no samples.

  • 2023/03/31 Fixed crash while opening lookup tables with corrupted or badly formatted files.

  • 2023/03/30 Fix repopulate of DB after change in ‘show mov’ menu.


  • 2023/04/05 Fixed bug for which in download RS3 could be generating (false) errors upon importing into the DB.


  • 2023/03/30 SmartyCam3: fixed bug using custom protocol from master when changing units of measure in protocol channels.

  • 2023/03/30 SmartyCam3: fixed bug in ‘Steering Pos’ control that disappears when using the channel with decimals. Firmware update is required.

3.57.16 - March 29th, 2023


  • 2023/03/29 LogSheets fixes: some of the fueling data were missaved, karting setup does no more show car data, reduced flickering in the image on the right, fixed behaviour for junior dragsters that showed wrong fields.

  • 2023/03/29 LogSheets settings fixes: the radio button works on left button down instead than on click.

  • 2023/03/29 Fixed decimals issue in LogSheets.

  • 2023/03/29 Fixed flickering for minor changes in LogSheets image.

3.57.14 - March 28th, 2023


  • 2023/03/28 Fixed HP and CV unit conversions.

  • 2023/03/21 Fixed crash of RS3 over problems in logging in to AiM servers.


  • 2023/03/28 CAN Output: fixed bug when changing the units of measurement of the channels.

  • 2023/03/23 GPS 09 C Open: fixed bug when opening configuration that always showed CAN.

  • 2023/03/22 Overlay: restored the min and max scale settings in bargraphs control.

  • 2023/03/22 GPS 09 C Open: fixed bug when switching from serial to CAN that did not change configuration.

  • 2023/03/17 GPS 09 C Open: management of reading the name of the configuration.

  • 2023/03/16 GPS 09 C Open: small changes in GUI.

  • 2023/03/16 SmartyCam3: management of track map using ECU channels.

  • 2023/03/16 Dash 10inch: revised background on page p23iext (improved rendering when sent to device).

  • 2023/03/14 GPS 09 C Open: small changes in GUI.

  • 2023/03/10 Managed SmartyCam3 GP.

  • 2023/03/10 SmartyCam3: fixed bug when switching connection from Master to Stand Alone where RPM and gear channels could be missing.


  • 2023/03/28 Fix in assigning a user created track map: RS3A could still be saying the map was “not compatible”.

  • 2023/03/28 Fix in LookupTables 2D: the assignment of axis value could be impossible.

  • 2023/03/27 Allowed log-sheets for speed race mode.

  • 2023/03/24 Rearranged icons positions.

  • 2023/03/24 Fixed cursor movement in time base, now it can’t move after slice limits, exactly like in distance base.

  • 2023/03/23 Added possibility to compute math channels with stepped interpolation, linear interpolation or cubic interpolation.

  • 2023/03/23 Added math function for Median Filter.

  • 2023/03/23 The track map creation has been moved into the Tracks window.

  • 2023/03/22 Added possibility to create a track map only layout.

  • 2023/03/22 Some tweaks to functions usable when creating math channels.

  • 2023/03/21 Fix in math channels. We found (rare) cases in which the basic operation (+-*/) could be skipped.

  • 2023/03/21 Fix in time/distance window. Plots could result being wrongly scaled upon dragging across start/finish line.

  • 2023/03/21 Fixed zoom in time distance. Releasing the mouse button outside the time/distance window could lead to no data displayed.

  • 2023/03/16 New user interface for the definition of LookUp Tables.

  • 2023/03/13 Fixed misbehaviour in selectability of flags in batch conversion window.


  • 2023/03/24 Track editing window controls have been repositioned to maximize the space for the map.

  • 2023/03/23 The track map creation window has been reorganized to allow more space to the GPS map.

3.56.01 - March 9th, 2023


  • 2023/03/09 MXPS: fixed bug in missing font.

Web Updates

  • 2023/03/09 Enabled first firmup capability for GPS09(s).

3.55.31 - March 8th, 2023


  • 2023/03/08 CAN Builder: fixed bug about different channel functions with same label.

  • 2023/03/06 GPS 09 C Open: small changes in GUI.

3.55.25 - February 24th, 2023


  • 2023/02/21 Minor fix to increase RS3 login stability.


  • 2023/02/24 Fixed track identification bug in track map window.

  • 2023/02/24 Fix track recognition for Assetto Corsa tracks: VIR, Watkins Glen and Road America.

  • 2023/02/20 Added track inner air temperature functions.

  • 2023/02/20 Bug fix in recovering maximum number of reference slices while loading the profile.

  • 2023/02/20 Bug fix in drawing more than one slice with the same length on the track map.

  • 2023/02/17 Fixed selection of best lap with a session of three total laps, it wrongly ended up with no laps selected.

  • 2023/02/16 Fixed crash that could happen when showing the video preview and moving preview window position from lateral to bottom.

  • 2023/02/15 Added possibility of changing the selected split in the track report window.

  • 2023/02/14 Improved track creation window: better check for compatible tracks, that also are shown in map window.

  • 2023/02/13 Added possibility to insert split at cursor position in time-distance view.

  • 2023/02/13 Fixed bug for which the doubleclick in channels report and/or in track report didn’t move the session cursor to the item correct position.


  • 2023/02/16 Fixed bug when saving GPS inline acc in display configuration. This could skip saving operation.

  • 2023/02/15 SmartyCam3: fixed bug when saving configuration background (randomly it could skip saving operation).

  • 2023/02/15 Dashes: fixed bug for vertical bargraphs in driver page 17 (badly rendered once sent to devices).

  • 2023/02/10 SmartyCam3 Dual: Fixed bug when using stand alone with some ECU protocols that could work incorrectly.

  • 2023/02/09 PDM: Fixed bug that could make some status variables no longer accessible in configuration and appear as Power Outputs channels in the channel selection window.

  • 2023/02/08 SmartyCam3 resources: new background solid color (black and white) and new grid.

  • 2023/02/08 SmartyCam3 resources: lean angle enabled for angle functions.

  • 2023/02/07 Fixed crash of Race Studio about editing an expansion name then editing expansion serial ID.

  • 2023/02/06 Fixed bug in Trigger Command or Output Signal that could display incorrectly when opening more than one configuration.

Tracks Manager

  • 2023/02/15 Fixed bug: aborting a track receive operation could result in locking the track database.

  • 2023/02/14 Improved track creation window when connected to AiM server: nation, address and zip code are automatically populated.

3.55.19 - February 3rd, 2023


  • 2023/01/31 Bug fix in communications with AiM server to avoid possible crashes of RS3.


  • 2023/02/02 Fixed bug in graphic control font setting where the button could disappear.

  • 2023/02/03 SmartyCam 3: updated graphic controls previews in tab ‘Extras’.

  • 2023/02/01 SmartyCam 3: added graphic controls for lean angle e steering pos.

  • 2023/01/31 Fixed bug in some bargraph graphic controls for SmartyCam 3, MXG, MXS, MXS Strada.

  • 2023/01/25 Fixed bug about permanent warning icon on Status Variables tab.


  • 2023/02/01 Added possibility to export chunks of mp4 files, exactly like mov files.

  • 2023/02/01 Time Compare behaves now exactly like RS2A, upon zooming in: in ‘snap to lap’ mode the zero point is the beginning of lap, in ‘snap off’ mode the zero point is the beginning of the considered slice.

  • 2023/01/31 Improved management of lap colors across command to select best N laps.

  • 2023/01/30 Bug fix in creation of analysis mate windows: it didn’t work on PCs with one only display.

  • 2023/01/25 Added snaphot button to movie window.

Web Updates

  • 2023/01/30 Bug fix for menu buttons remaining disabled after answering “No to update confirmation.

3.55.16 - January 26, 2023


  • 2023/01/23 Fixed the snapshot capture made by RS3 for SC3: now the saved file features the correct dimensions. Once finished, RS3 also opens the saved file in Windows Explorer.

  • 2023/01/23 Possible fix to device ‘unclickable’ in device list.

  • 2023/01/20 Added management of COTA race track in sessions coming from AC/ACC simulators.

  • 2023/01/17 SmartyCam 3 connected to Master: fixed possible bug in the management of previously used ECU protocols.

  • 2023/01/17 SmartyCam3 that uses a customized CAN protocol: fixed bug in the management of decimal values.


  • 2023/01/25 Fixed bug about permanent warning icon on Status Variables tab.


  • 2023/01/25 Added snaphot button to movie window.

3.55.14 - January 19th, 2023


  • 2023/01/19 Smartycam3: removed graphic resources that could not show correct behaviour.

3.55.12 - January 17th, 2023


  • 2023/01/16 Security patch for SC3 communications.

  • 2023/01/12 Fixed memory management bug in download phase, that could randomly lead to drk/csv/kml files not being created.

  • 2023/01/12 Fix in download from SD card, that could imply a file not being copied (Changed parameters passed to CopyFileEx, as a Microsoft recommended fix after a regression with recent Windows(TM) updates).

  • 2023/01/11 Fixed channels sampling rate in export of s3t files.

  • 2023/01/11 Fixed sorting of channels in export of s3t files.

  • 2023/01/10 Crash fix in export of s3t files in case of no GPS data available.

  • 2023/01/10 Added management of Sebring race track in sessions coming from AC/ACC simulators.

  • 2023/01/09 Fixed management of login icon (that could remain indicating the mail instead of nickname).


  • 2023/01/16 Improvements in logbook management.

  • 2023/01/11 The DB list, once in last imported sessions mode, wasn’t sortable by last import date, though truly showing all last imported ones.

  • 2022/12/30 Added export (to Excel(TM) and CSV) capability to split report.

  • 2022/12/22 Fixed behaviour of selection by flags in RS3 Analysis Database, agenda mode, with cloud enabled.


  • 2023/01/10 From now on PT-100 is the first sensor in the list and the default choice for temperature functions of a channel, instead of thermocuples.

  • 2022/12/30 SmartyCam 3: managed rolling lap number.

  • 2022/12/23 SmartyCam 3: managed best lap number.

3.55.08 - December 21st, 2022


  • 2022/12/21 Added Date and Time controls for SmartyCam 3.

  • 2022/12/20 Fixed needle and bargraph scales for some SmartyCam 3 controls.


  • 2022/12/21 Fixed click on sessions in agenda mode.

  • 2022/12/21 Fixed click on some list controls headers, that could not manage correctly the flags.

  • 2022/12/21 Export vs Excel implemented for channels report.

  • 2022/12/19 Bug fix for analysis DB filters selection.

3.55.06 - December 16th, 2022


  • 2022/12/16 Fixed call to RS3 client application that manages cloud push notifications, that in some cases could be “eating” processing resources.

  • 2022/11/29 The design of main icons has been shlightly changed.


  • 2022/12/14 Smarty 3: bug fix in graphic scale (for rpm/speed controls).

  • 2022/12/06 Dash graphic: fix bug in bargraph position.

  • 2022/12/02 Allowed MXT and MXT Strada configuration.

  • 2022/11/29 Smarty 3 DUAL: Start recording condition handled properly.


  • 2022/12/05 Fix on modification of metadata for files shared on AiM cloud.

  • 2022/12/01 Some fixes to dragster logbooks working.

  • 2022/11/29 Fix to analysis search bar.

  • 2022/11/29 Preview window gets hidden/shown with ctrl+spacebar.

3.53.21 - November 25th, 2022


  • 2022/11/24 Fixed bug that could forbid the correct RS3 closure.

  • 2022/11/22 Update in translations files.


  • 2022/11/25 Minor fix to analysys DB, to manage unlikely but possible file renaming.

  • 2022/11/25 Introducing AiM cloud on beta channel.

  • 2022/11/22 Fixed function names shown in channels settings window.

  • 2022/11/22 Fix in database window: shown buttons could result to be the wrong ones.

  • 2022/11/21 Sessions smart calendar now correcly reacts to DB filters change.

  • 2022/11/21 Batch conversion: added possibility in option-converter.txt to save, in exported files, channels with underscores (just add line: underscore-instead!).

  • 2022/11/18 Fixed bug on junior dragsters while setting wheel circumference and drive/driven teeth number.


  • 2022/11/25 Bug fix: it was no longer possible to select the colour of the alarm leds on the GS Dash.

  • 2022/11/22 SC3 Dual: Support for mirroring and resizing of secondary cam.

  • 2022/11/22 RIO2: fixed bug when adding a RIO2 expansion that didn’t show any channels.

3.53.14 - November 11th, 2022


  • 2022/11/18 Fixed bug about a PDM Keypad CAN Output message that was sent even when there is no keypad enabled.

  • 2022/11/17 SmartyCam HD: fixed the label placement preview in display tab showing too high.

  • 2022/11/16 Fixed minor bugs about texts in Parameters panel of a device configuration.

  • 2022/11/16 Fixed minor bug about enabling Save button in alarm settings window.

  • 2022/11/10 SmartyCam3: display preview updated when switching between StandAlone/ECU/CAN Protocol.

  • 2022/11/08 Fixed bug about enabling gain and offset controls in ‘CAN Measure Settings’ window creating a custom CAN protocol.

  • 2022/11/08 GotoPageNumber for PDM, SW4: fixed bug in selectable channels showing incorrect status variable channel.

  • 2022/11/08 CAN output Import: improved message when an invalid file is selected.

  • 2022/11/07 Smarty3 custom protocol: fixed bug in channel format.


  • 2022/11/18 The preview window can now be shown/hidden using the space bar.

  • 2022/11/17 Crash fix in Laps Report window.

  • 2022/11/17 List Controls inner working has been revisited.

  • 2022/11/15 Search feature revisited.

  • 2022/11/11 Allowed seach bar into a bette placement (like other RS3 windows).

  • 2022/11/08 Allowed reload of current profile.

  • 2022/11/08 Fixed math channels recomputation issue.

  • 2022/11/08 Fix in plotting of a zoomed channel, or of a channel with very few points.

  • 2022/11/04 Fixed hiding of track reference line, that could result not working on web tiled mapping.


  • 2022/11/07 For safety purpose, now RS3 logs out and deletes user after login attempt with bad password.


  • 2022/11/15 Fix to the “Update Device” button that could find itself hiding a device if connected through two different paths.

3.53.07 - November 4th, 2022


  • 2022/11/04 Fix to RS3 internal log engine.

  • 2022/11/04 Fix to installer software engine.


  • 2022/11/03 Crash fix to unmanaged configuration date.

  • 2022/11/03 Improved import cfg from SmartyCam2.


  • 2022/11/04 Fixed hiding of track reference line, that could result not working on web tiled mapping.

3.53.05 - November 3rd, 2022


  • 2022/11/03 Updated installer software engine.

  • 2022/11/03 Ethernet scan (for AiM devices communication) now is on for all.

  • 2022/11/02 Bug fix in communication with SC3: sometimes RS3 can send a wrong command.

  • 2022/10/31 Bug fix: the software behavior window could wrongly be showing an empty message box.


  • 2022/11/03 PDM/08: Added Trigger Command to ResetCounter (odometers and fuel used).

  • 2022/11/03 SW4: increased the max number of math channels availabled on the device up to 100.

  • 2022/10/28 Dash display: removed graphic control (p17i) which contains errors. Added new p19i.


  • 2022/11/02 Fixed bug for which a session loaded could result showing no splits.

  • 2022/11/02 Fixed crash upon computing splits.

  • 2022/10/31 Added possibility to avoid show track reference line.

  • 2022/10/31 Math channel creation, improved wording: Renamed label ‘Area’ into ‘Group’.

Track Maps

  • 2022/10/31 Bug fix: there were cases in which reference points erroneously resulted hidden.


  • 2022/11/02 Bug fix in SC3 firmup that wasn’t working at all.

3.52.92 - October 27th, 2022


  • 2022/10/27 Added units m/s2 and ft/s2 for accelerometers.


  • 2022/10/27 Fixed bug: splits in time/distance plot can result in being misplaced.

  • 2022/10/26 Created math channel function LAP_EDGE_COUNTER.

  • 2022/10/26 Bug fix for lap summary preview window: flags coud result in not being responsive.

  • 2022/10/26 Bug fix for all preview windows that could result not being updated upon selected session change.

3.52.90 - October 26th, 2022


  • 2022/10/26 Bug fix in predictive reference lap files date, that was creation date/time instead of session date/time.

  • 2022/10/25 Bug fix in predictive reference lap files renaming/editing, that could lead to file deletion.

  • 2022/10/25 While saving predictive reference lap files data are now slightly undersampled.

  • 2022/10/25 Predictive reference lap files lists now feature also the file comment shown as tooltip.

  • 2022/10/24 Import/export of predictive reference laps now save the folder chosen by user.


  • 2022/10/26 Bug fix: computation of math channels using LUT(s) with uneven breakpoints could result miscomputed.

  • 2022/10/25 Bug fix: buttons dimensions in settings of channels window.

  • 2022/10/25 Bug fix: opening a session with one only split could result in laps list being empty.

  • 2022/10/24 Improved advanced information windows.

  • 2022/10/21 Improved formatting of times channels in channels list.

  • 2022/10/21 Fix in management of distance units of measures.

  • 2022/10/21 Fixed software times computation, to avoid very short time laps being created.

  • 2022/10/20 Bug fix in management of last session analysis time.

  • 2022/10/20 The Sessions DB now auto selects, after import, also when there’s only a “skipped import” result.


  • 2022/10/26 ‘+- Best Time’ has benne changed in ‘+- Ref Time’.

  • 2022/10/25 Fixed bug in trigger command: updating could generate errors

  • 2022/10/20 Fixed bug in alarms Messages/PopUp Colored, Timed: they might be not stored correctly.

  • 2022/10/20 Reset alarms as trigger command: it is now possible to reset only alarms whose final condition is ‘a button is pressed’.

  • 2022/10/20 Smarty3: fixed bug in graphic controls.

  • 2022/10/20 PushButton: channel selection enabled even when set to execute a trigger command.

3.52.85 - October 10th, 2022


  • 2022/10/10 Added Predictive Reference Lap manager window, that can be called both by the sessions DB window, and from the analysis window.

  • 2022/10/10 The predictive files list not describer how it’s sorted.

  • 2022/10/10 Bug fix: deleting the firmware reference lap file, all reference lap files were deleted.

  • 2022/10/10 Bug fix: now RS3 avoids saving predictive reference laps (informing users) when there’s no track associated with the session.

  • 2022/10/04 Updated Japanese language translations.


  • 2022/10/06 Enabled SmartyCam 3 Dual.


  • 2022/10/04 Fixed import of drk files: brake pressure channels could result unreadable.

3.52.81 - September 30th, 2022


  • 2022/09/27 (requires fw update) Added management of predictive reference lap.

  • 2022/09/23 There are cases in which Windows manages the WLAN scan with a certain latency… we coded to minimize this

    latency and to give the possibility to avoid WLAN scan (users need to connect to AiM devices using OS WiFi menu).

  • 2022/09/22 Fixed possible bug with the device network name in device window.

  • 2022/09/12 Fixes to the error messages of ‘Export for AiM’ feature.

  • 2022/09/09 Crash fix for the RS3 application, that could occur once left alone for roughly a dozen minutes.

  • 2022/09/06 Fixed behaviour of odometer change for OEM devices: it didn’t correctly manage an unlikely but possibly missing user login.

  • 2022/08/11 (requires fw update) Added possibility to extract log files from SC3 MP4 files.

  • 2022/08/10 Batch conversion utility now opens and selects output files in output folder, once the job is done.


  • 2022/09/23 Fixed bug about default multiposition statuses for keypad channel.

  • 2022/09/22 Fixed bug about setting a PopUp Color Message Timed: black was represented with a white icon.

  • 2022/09/21 Fixed bug about date of new configuration that caused new configuration not placed at top of the list if sorted by date

    and it might seem like it wasn’t created.

  • 2022/09/22 SW4: fixed bug in line color for channel setting (displayed dark).

  • 2022/09/20 Bug fixes in configuration transmission to PDM using 5 inches display.

  • 2022/09/19 PDM: Fixed bug about warning icon on Display Icon conditions based on a Power Output channel in PWM mode.

  • 2022/09/16 Fixed bug about creation date and date of main operations on a configuration.

  • 2022/09/16 Fixed bug in channel handling that caused a warning in the shiftligths window.

  • 2022/09/10 MXPS: fixed bug in the management of some channels.

  • 2022/09/07 GPS09_Open: fixed bug in trasmission of cfg.

  • 2022/09/07 Display: fixed bug in page p18i, p16i when changing units.

  • 2022/09/02 Fixed bug when importing protection key or web update key.

  • 2022/09/01 SmartyCam3: updated page ‘dash1’ for Solo2 DL.

  • 2022/09/01 Fixed bug that may occur when selecting status variables for a channel condition.

  • 2022/08/12 Fixes bug when deleting a status variable used in display.


  • 2022/09/16 Fixed sorting of sessions list.

  • 2022/09/15 Bug fix: the preview window could remain stuck showing the wrong session.

  • 2022/09/15 VLC movies window: fixed a number of possible crashes bound to VLC dll library problems.

  • 2022/09/14 Fixed shown property for recompute math channels button in the window for setting channels properties.

  • 2022/09/14 Math channels fixes for constant PI.

  • 2022/09/14 Math channels fixes for functions derivative and integral.

  • 2022/09/14 Crash fix while copying profiles.

  • 2022/09/14 Ensured correct disabling of some controls in the window for setting channels properties, according to channel types.

  • 2022/09/14 Avoided move to default lap upon any channels changes.

  • 2022/09/13 Added file name to session tooltip.

  • 2022/09/13 Improvement: after file export an explorer window upon exported file is automatically started.

  • 2022/09/12 Bug fix to files selection while importing a folder containing both xrk and xrz files.

  • 2022/09/09 Minor fix in track map selection window.

  • 2022/09/09 Fixed problem with the redraw phase of the time/dist window after pressure of space bar.

  • 2022/09/09 Fixed problem with channels settings window appearing below a possible analysis mate window, furthermore being not modal.

  • 2022/09/09 A number of fixes/improvements done on math channels: integr, deriv, comparison operators (now comparing using units),

    trigonometry functions outputting angles.

  • 2022/09/09 Bug fix on “g” to “ft/s2” conversion.

  • 2022/09/07 (requires fw update) Fixed Network ident in RS3 for memory module data, to allow a better work of data/video link

    while importing xrk files from MemoryModule or StradaLogger.

  • 2022/09/07 Fixed sessions DB list redraw upon data/video link-unlink.

  • 2022/09/07 Fixed use of search box in dlg sort strings.

  • 2022/09/07 Fixed crash importing or analyzing sessions with bad GPS data.


  • 2022/09/09 Bug fix in track maps device restore procedure.

3.52.77 - August 11th, 2022


  • 2022/08/11 Fixed crash that could happen while closing RS3.

  • 2022/08/10 Fixed bug for which on sessions recorded on a track shorter than 100 m the smart sync was not working.


  • 2022/08/10 Fixes to AiM SmartyCam3 stream protocol.


  • 2022/08/11 Added possibility to extract log files from SC3 MP4 files (requires fw update, once ready).

  • 2022/08/10 Batch conversion utility now opens and selects output files in output folder, once the job is done.

  • 2022/08/08 Minor efficiency improvements.

3.52.75 - August 4th, 2022


  • 2022/07/29 SW4: fixed bug in configuration of buttons that cannot be changed.

  • 2022/07/29 SmartyCam3: updated channel format in default stream protocol (ie brake and oil press).


  • 2022/08/04 Fixed list box controls that could forbid user selection in case of one only item inserted.


  • 2022/08/04 Fixed bug in communication window that could wrongly keep asking a display resolution choice to users.

  • 2022/08/03 Added MXPS to the devices that mandate asking AiM for odometer change.

3.52.72 - July 27th, 2022


  • 2022/07/26 Fixed communication issue that makes internet connection more stable during updates and tracks downloads.

  • 2022/07/25 General minor improvements in software speed.

  • 2022/07/20 When plugging to the PC a memory card that’s read only, a new icon is shown, helping users understanding the card is locked.


  • 2022/07/27 Fixed issue with calendar sorting that was broken by a previous version.

  • 2022/07/20 Fixed preview window not being reactive to session change.

  • 2022/07/20 Fixed sorting no more working in sessions DB.

  • 2022/07/20 Improved flicker management in preview window.

  • 2022/07/19 Math Channels fix: the formula edit box keeps selection highlight also when looses focus.

  • 2022/07/15 Math Channels fix: the ‘POW’ function is back working.

  • 2022/07/15 Math Channels fix: ‘EDGE_COUNTER’ function has been modified to work directly on channels and to use specific words, examples: EDGE_COUNTER(“Gear”, FALLING) EDGE_COUNTER(“Condition”, FALLING) EDGE_COUNTER(“Gear”, BOTH).

  • 2022/07/15 Some fixes to sessions database, to better manage the ‘agenda’ mode.


  • 2022/07/22 PDM,PDM08: improved management of output signals.

  • 2022/07/21 SmartyCam3: fixed bug when setting units in graphic controls in an existing cfg.

  • 2022/07/20 Fixed bug when transmitting to device: a warning message that firmup was needed.

  • 2022/07/19 MX2E: added the management of SmartyCam3 custom stream protocol.

3.52.65 - July 8th, 2022


  • 2022/07/07 Fixed RS3 opening slowliness while issues and/or timeouts occur on AiM server.

3.52.63 - July 4th, 2022


  • 2022/07/04 Fixes to some context menu (map and time/dist windows) that could result in being not managed.

  • 2022/07/01 When analysis is in dragster mode, the time compare management function (typical for lap based analysis) are not allowed any more.

  • 2022/07/01 Added possibility to force math channels recomputation, from within math channels application window an channel settings window.


  • 2022/07/02 MXPS: updated configuration. ECU features have been grouped in a tab ‘ECU’.

  • 2022/07/01 SmartyCam3: updated resorces for Solo2-DL.

  • 2022/07/01 fixed bug when modifying Power Output channels used in display that could cause the forced closing of the software.

3.52.60 - June 30th, 2022


  • 2022/06/30 Fixed logbook management, that could result in a bad management of conversions into imperial units.

  • 2022/06/30 Fixed bug that could prevent dragster default logbook computation (included run start offset).

  • 2022/06/30 Bug fix for which in dragster run performance dialog the conversion of speeds was wrongly managed.

  • 2022/06/30 Bug fix for weather information convertion in imperial units (that was wrongly executed twice).

  • 2022/06/30 Bug fix in initialization of velocity units after a change on speed units.

  • 2022/06/30 Fixed conversion for angular velocity units in math channels.

  • 2022/06/27 Math channels fix: LOW pass function not working as expected.

  • 2022/06/27 Math channels: created function BISTABLE and EDGE_COUNTER.

  • 2022/06/24 Math channel fix on a warning erroneously shown while validating math formulas.

  • 2022/06/24 Improved math channel integral function management of units of measures when integrating boolean conditions.

  • 2022/06/24 Fix in population of manual collections.

  • 2022/06/22 Improved usage of units of measure in math channels.

  • 2022/06/22 While setting channel properties, the change of function is now properly stored.

  • 2022/06/22 Fix on importing xrk files upon doubleclick in Windows Explorer.

  • 2022/06/22 Added command to remove all track sectors.

  • 2022/06/22 Crash fix while changing the track map associated to a session.

  • 2022/06/22 Fix upon a wrong warning icon shown in math channels creation window.

  • 2022/06/09 Math channels: when creating a channel with an unused name, a warning is shown informing users to be aware of that.

  • 2022/06/09 Fixed renaming of math channels.

  • 2022/06/09 Prevented application of a math channel when a channel with same name already exists.

  • 2022/06/08 Fastest lap identification while opening a session for analysis has been improved.

  • 2022/06/08 Channel selection window: the channel function is shown next to channel name.


  • 2022/06/28 PDM: from now on it is possible to configure the CAN2 Output together with a keypad (not yet allowed in release).

  • 2022/06/26 SmartyCam3: fixed misbehaviour of pressure channels.

  • 2022/06/21 SmartyCam3: added predictive lap time channels.

  • 2022/06/17 SmartyCam3: added a new graphic set reproducing the Solo2-DL display.

  • 2022/06/13 Managing of Rio 02B and Shiftlight B expansions.


  • 2022/06/08 RS3 download: fixed export of csv files during the download.


  • 2022/06/10 Only translated languages resources are now available.

  • 2022/06/10 Updated languages translations.

3.52.48 - June 7th, 2022


  • 2022/06/07 Fixed misalignment of analysis DB columns.

  • 2022/06/07 Fixed mini issue with ATAN2 function in math channels.

  • 2022/06/06 Histograms now better consider time spent in every single bar value.

  • 2022/06/06 Fixed renaming of map last sector.

  • 2022/06/06 Math channels: fixes in the way the RS3 Database acts upon a change in a math channel formula.

  • 2022/06/06 Default math channels are forced to rebuild, this after having identified a possible issue with some channel functions.

  • 2022/06/06 Math channels: improved error messages for a better identification of mistakes or typos in formula.

  • 2022/06/06 Math channels formula: improved management of double quotes.

  • 2022/06/01 Split type selection menu now features a colored icon that matches the split default color.

  • 2022/06/01 In case a user selects classic toolbar buttons instead of flat buttons icon are now better managed.


  • 2022/06/06 SmartyCam3: updated resources.

  • 2022/06/03 Fixed bug for which all configurations wrongly modified the SmartyCam stream to SmartyCam3 stream.

  • 2022/06/04 Fixed bug for which there could be cases in which configurations were exported in a file with name but no .zconfig extension.

  • 2022/05/31 SmartyCam3: fixed multiplier and offset values converting from CAN Output Stream of a device to CAN Input Protocol of SmartyCam3.

  • 2022/05/30 SmartyCam3: measure value now corresponding to the unit set in the custom protocol.

  • 2022/05/25 SmartyCam3: Updated resources (set 04,05,06, dashes 01,02,03).

  • 2022/05/27 Images Custom for Logos and icons: managed in imported configs.

  • 2022/05/26 SmartyCam3: Fixed bug when saving the advanced CAN protocol without modifying the default name in the edit box.

  • 2022/05/26 SmartyCam3: Fixed bug in the unit measure of channel protocol when click on ‘Replace’ button.

  • 2022/05/26 SmartyCam3: Added horizontal scroll bar in graphics settings.

  • 2022/05/25 SmartyCam3: Updated resources (set05, dashes 01,02).

  • 2022/05/25 SmartyCam3: Managed custom logos when importing configuration.

  • 2022/05/25 SmartyCam3: fixed bug in the unit measure of channel protocol.

  • 2022/05/24 SmartyCam3: removed the filtering on internal battery channel.

  • 2022/05/19 SmartyCam3, Custom CAN protocol: duplication of CAN addresses avoided. Preset with a valid address value.

  • 2022/05/20 SmartyCam3: fixed the “dirt” left by deleting a item from overlay.


  • 2022/06/01 Improved verifications to prevent tracks from appearing with ‘unknown’ nations.

3.52.37 - May 17th, 2022


  • 2022/05/17 Bug fix: a login request message could be wrongly shown to user.

  • 2022/05/16 Added possibility to manage a different file name separator in download fields.


  • 2022/05/17 Populate of sessions DB has been made a little quicker.

  • 2022/05/17 Math channels bug fix: while using CHF in a formula the UI could mislead the user in case a channel with a specific function couldn’t be find in a session.

  • 2022/05/16 Improved available space verifications upon import of movies.

  • 2022/05/09 Bug fix for audio settings in movies.

  • 2022/05/09 Bug fixes in histograms settings.

  • 2022/05/06 Bug fix for importing GPS data at 10 Hx for drk files.

  • 2022/05/05 Fix to avoid toolbar buttons flickering.

  • 2022/05/04 Fixed date/time correction for sessions when importing data sessions that are not made on a recognized track.

  • 2022/05/03 Added automatic mov/fof correction while importing mov files.

  • 2022/04/29 Fix in management of the weekday while importing xrk and mov files, that could result in being the weekday of import instead of data recording.

  • 2022/04/27 Better management of cases like RS3 install drive gets full.

  • 2022/04/27 Fix in csv export (SCCA, RS2A like, FastLap), consequence of a possible wrong resample of GPS data.

  • 2022/04/21 RS3A now can show warning icons and tooltips in case the run features issues, example: in case of unrecognized track.


  • 2022/05/16 SmartyCam3: update resources and software background.

  • 2022/05/13 SmartyCam3: updated resources and enabled new cfg for Dual model.

  • 2022/05/13 SmartyCam3: fixed bug when selecting a logo.

  • 2022/05/11 SmartyCam3: full scale managed in accelerometer. Default 2g.

  • 2022/05/11 SmartyCam3: updated resources.

  • 2022/05/09 SmartyCam3: fixed bug in bargraph controls.

  • 2022/05/09 SmartyCam3: updating e new resources: bargraph rmp and speed set04.

  • 2022/05/06 SmartyCam3: updating e new resources.

  • 2022/05/05 Fixed bug about warning icon on condition on a single bit of bitfield channel.

  • 2022/05/05 Fixed user interface bug of shown controls in window of condition settings, when defining a condition on a single bit of bitfield channel.

  • 2022/04/29 Fixed bug upon problems with disappeared power output channels they are now added again.

  • 2022/04/29 Fixed bug about alarms not working in configuration EVO5 with GSDash.

  • 2022/04/27 Fixed bug about disabled channels of enabled keypad that can generate warning on others channels.

  • 2022/04/21 SaveAs: fixed bug that could occur using some ECUs.

  • 2022/04/21 fixed bug that could give an error message when starting RS3 in Windows7.


  • 2022/05/04 Fixed a possible crash during data download.

3.52.18 - April 20th, 2022


  • 2022/04/20 Fixed bug for which two tabs of analysis views were closed instead of one upon a single user click.

  • 2022/04/20 Improved verifications on sessions upon map cancellation.


  • 2022/04/20 Fixed bug in detection of warning conditions.

  • 2022/04/19 Channel Expansions: fixed bug for gear potentiometer with custom sensors.


  • 2022/04/20 Fixed bug on the lap closure upon creation of a new track.

3.52.16 - April 19th, 2022


  • 2022/04/15 Fixes bug for which some files (xrk or drk) could be imported with GPS samples at 4 or 8 Hz.

  • 2022/04/15 Fixes crash that could occur while, on a slow PC, fast switching the selected session in DB, with preview window open.

  • 2022/04/14 Fixes to one/two possible math channel crashes.

  • 2022/04/14 Minor fixes to SC3 mp4 files management.

  • 2022/04/06 Some fixes to the capability of choosing functions for channels.

  • 2022/04/06 Fix in verification of xrk/mov files being imported during the download, to avoid the possibility to import the same file twice.

  • 2022/04/06 The RS3 analysis database now highlights newly imported files also if importing during download.

  • 2022/04/06 Bug fix: units of measure for math channel now implies the correct use of the unit itself for math channel.

  • 2022/04/06 Fixed verification of math channels when enabling them for a session.

  • 2022/04/06 Analysis panels icons and menus have been reviewed, the same happened to settings dialog windows of each panel.

  • 2022/04/06 Channels with no samples are now imported in Analysis, and will be listed in Channels List with a comment stating there’s no sample.

  • 2022/04/06 Fixed activation of mate windows, that coud errooneously be placed under the main RS3 window.

  • 2022/04/06 Fix of possible crash while closing analysis windows.

  • 2022/04/06 Fixed possible issue while passing a negative number as math function parameter.

  • 2022/04/06 Fixed bug for which the Analysis mate window didn’t manage keyboard commands (zoom, cursor fwd and bwd).

  • 2022/04/04 Math Channels: fixed issue with variadic boolean operators (AND,OR,XOR).

  • 2022/04/04 Math Channels: fixed crash that could occur while computing composed channel formulas.

  • 2022/04/01 Math Channels: removed limits on math channel name length.


  • 2022/04/15 Fixed bug about warning on icons using status variables.

  • 2022/04/15 Fixed bug about warning on alarms using CAN protocol channels not correctly identified.

  • 2022/04/14 The button channel configuration window is now resizable and managed with scroll bars.

  • 2022/04/13 ADR: fixed management of internal channels (logger temp, vbatt).

  • 2022/04/06 EVO4S, EVO5: management SmartyCam3 Stream.

  • 2022/04/06 Parameters: fixed bug that could not transmit start recording condition.

  • 2022/04/06 PullUp condition: fixed bug in saving setting.

  • 2022/04/06 SmartyCam3: added new graphic resources.

  • 2022/04/05 SmartyCam3: channel name label can be set in each graphic control independently.

  • 2022/04/01 Expansion:Fixed bug in ‘SaveAs’ cfg.

  • 2022/04/01 SmartyCam3: added new dispay resources.

  • 2022/04/01 SmartyCam3: fixed bug channels values for crypting and memorization.

  • 2022/04/01 Fixed bug in Keypad 32 settings and can now be used again.

  • 2022/04/01 Fixed bug on trashed custom CAN protocols which were however selectable in the configurations.

  • 2022/04/01 Now when transmitting a configuration with incompatibilities to 1.3 devices a warning informs the user.

  • 2022/03/31 SmartyCam3: fixed bug in default AiM stream CAN protocol which could sometimes convert some channels incorrectly.

  • 2022/03/31 Fixed bug in the display of some channels of Mxm and GSDash graphic pages.

  • 2022/03/31 SmartyCam3: added new graphic sets.

  • 2022/03/30 Expansions: fixed bug in serial number display and fixed conflict when adding a new expansion.

  • 2022/03/28 A message informs you about configuration compatibilty for device 1.3. You can also choose not to show the message again (this option can be reset from the menu ‘Preferences/Software Behavior/Automation’).

Web Updates

  • 2022/04/15 Fixes bug for which it was impossible to firmup an SD card for SC3 Sport.

  • 2022/04/09 Improved hash verification to get a higher reliability upon download of files from AiM server.


  • 2022/04/13 Fixed email address verification routines.

  • 2022/04/13 Fix export to csv for missing commas in header row.

  • 2022/04/12 Some language fixes.

  • 2022/04/05 Improved checks on closing all parallel execution threads, to forbid RS3 from remaining open in the task manager.


  • 2022/04/04 Inserted retry for devices that can be lazy to open USB communication line due to checks on the USB driver operated by MS Windows (TM) antiviruses.


  • 2022/04/10 Bug fix: now it’s possible to “download” mp4 movies from SC3 microSD cards.

Simulator Manager

  • 2022/04/01 Added verification to stop communication while RS3 is open (comms are set back to normal when RS3 gets closed).

3.52.06 - March 29th, 2022


  • 2022/03/29 Some fixes in track map lines management.


  • 2022/03/29 Enabling SmartyCam3 back (wrongly hidden).


  • 2022/03/29 Improved reliability upon plugging of USB devices that for hardware reasons (i.e. lazy USB hubs) are late to stabilize the USB comm line.

3.52.05 - March 29th, 2022


  • 2022/03/23 SmartyCam3 enabled.

  • 2022/03/21 Improved the automatic correction of the condition operation to better adapt to the original configuration when there are problems of inconsistency in the operation or thresholds.

  • 2022/03/21 Fixed bug in CAN Output Exported cfg: feature could be empty.

  • 2022/03/16 Improved the automatic correction of the condition thresholds (values and / or text) to better adapt to the original configuration when there are problems of inconsistency in the thresholds.

  • 2022/03/11 Managed MXPS device.

  • 2022/03/09 Fixed a bug that could sometimes prevent the configuration from being sent correctly.

  • 2022/03/08 Fixed bug about conditions on coded channel (like ECU Gear) that was managed as simple numeric channel, not as coded one.


  • 2022/03/25 Math Channels: Fixed subtraction and exponential computation in case of numeric value used as input.

  • 2022/03/25 Math Channels: Fixed crash while recomputing a channel with TIME_SHIFT function.

  • 2022/03/24 Math Channels: some fixes to channels editing.

  • 2022/03/22 Math Channels: a couple of fixes on error messages of math channels and to units management inside newly added conditions validation channels.

  • 2022/03/22 Math Channels: added condition functions.

  • 2022/03/22 Time/distance plot: shift+click moves the cursor at the closest sample.

  • 2022/03/22 Preview: added lap percentage to laps report.

  • 2022/03/21 Math Channels: fixed bug in import of math channels.

  • 2022/03/18 Math Channels: a lot of fixes.

  • 2022/03/18 Math Channels: introduced lookup tables.

  • 2022/03/18 Math Channels: added functinos for EMA (Exponential Moving Average), UWA (UnWrapper Angle, for drifters), CR_INTEG (Conditional Reset Integral).

  • 2022/03/18 Track Map: fixes to a possible missing route in track map.

  • 2022/03/08 Selected laps and slices in channels list feature now a better title.

  • 2022/03/04 Some bug fixed in math channels management.

  • 2022/03/04 Fixed channel frequency and units management while importing drk data.

  • 2022/03/04 Fix: avoided crash in filtering.

  • 2022/03/03 Fix in drawing of circular grid in scatter plot.

  • 2022/03/03 Bug fix: the time compare height position in time/distance plots is now correctly managed.

  • 2022/03/03 Fixed bug in channels sorting, to avoid wrongly loading all channels names stored into profiles.

  • 2022/03/02 Bug fix in channels report: time of min and time of max are back working.

  • 2022/03/02 Bug fix in channels report: added “Integral” and “Module Integral” like RS2A.

  • 2022/03/02 Adjusted Channels settings window, in order to disable instead of hide the decimal places combo when only one possibility is available.


  • 2022/03/24 Fixed crash in odometers setting window.

  • 2022/03/18 Improvements in language translations (ita/jpn).

  • 2022/03/03 Fixed some language typos here or there.

  • 2022/03/01 Fixed bug for which SD Cards from Strada Logger and Memory Module couldn’t be recognized.

3.51.38 - February 28th, 2022


  • 2022/02/28 Fixed possible bug while importing SmartyCam3 mp4 files (the file could result not being imported).

  • 2022/02/28 Fixed possible crash while importing mov files.

  • 2022/02/28 Fixed possible busy loop trying to import corrupted mov files.


  • 2022/02/28 Bug Fix in CAN Output Export file: the generated file was no longer importable.

3.51.37 - February 25th, 2022


  • 2022/02/25 Bug fix: the ‘color per channel’ in track map was no more working.

  • 2022/02/25 Bug fix: the mixed plot position wasn’t saved and restored in profiles.

  • 2022/02/25 Bug fix: the ‘visible’ status in profiles could result in not being correct.


  • 2022/02/25 Fixed bugs about managing of maximum number of enabled channels of an ECU / CAN2 protocol.

3.51.36 - February 24th, 2022


  • 2022/02/24 Fix on track maps updates after split type change.

  • 2022/02/24 Bug fix while importing movies, that could wrongly say that no metadata were available.

  • 2022/02/24 Crash fix while importing data.

  • 2022/02/24 Fix in DB import dialog window: the show in explorer option was non working for a single file.

  • 2022/02/24 Crash fix while changing channel parameters.

  • 2022/02/23 RS3 imports into RS3A database by default.

  • 2022/02/23 Video window: added possibility to open operating system default application for videos.

  • 2022/02/23 RS3 Batch Convert: added possibility to convert also mov into other formats like drk, kml, …

  • 2022/02/22 Small fix in web based track drawing.

  • 2022/02/22 Added import button in DB page.

  • 2022/02/22 Added custom layout only in dev and beta.

  • 2022/02/22 Simulators: fixed GPS data while import.

  • 2022/02/21 Movies: fixed bug for which shown movies were not managed correctly after closing the channels settings.

  • 2022/02/21 Profiles: improvement in save speed.

  • 2022/02/21 Fixed but for which web based maps could result in being hidden.

  • 2022/02/21 Fixed bug in space bar pressure management, for which the last window in a row could not be hiding.

  • 2022/02/21 Fixed computation bug in math channels.

  • 2022/02/18 Profiles: now the selected tab is saved into profiles.

  • 2022/02/18 Histograms fixes: samples scale name wasn’t shown.

  • 2022/02/18 Histograms fixes: cumulative button now is shown only when at least two laps per session are shown.

  • 2022/02/17 Fixed bug for which a session on open track could generate a crash while changing it map.

  • 2022/02/17 Fixed redraw lag in time/distance view.

  • 2022/02/16 Some fixes and new features to math channels.

  • 2022/02/16 Added possibility to open and import mp4 files (only non fragmented).

  • 2022/02/14 Fixed channel sorting in time/distance view.

  • 2022/02/14 Bug fix in importing data from M5s with channel expansion.

  • 2022/02/14 Some fixes in math channels.

  • 2022/02/14 Handles unit conversion in case of GPS Altitude Channel.

  • 2022/02/11 Fixed issue while drawing the track map (some lines could remain hidden).

  • 2022/02/11 Fixed GPS data in iRacing sessions import (in some computations data were converted from duble to float, loosing resolution).

  • 2022/02/11 Improved control on file system, to avoid uselessly locking files after importing into the DB.

  • 2022/02/10 Fixed bug for which the track map, set to colorize traces on a channel, could be hiding some traces in case the channel wasn’t found in the session. Now it defaults color to trace color.

  • 2022/02/10 Fixed bug for which the track map was erroneously hiding the map trace in case the line width was set to zero with points size different from zero.

  • 2022/02/07 Renamed from “Clear” to “Delete” the menu used to delete profiles.

  • 2022/02/03 Improvements on cloud.

  • 2022/02/01 Some fixes to the calendar/track filter selection in the left part of sessions DB, to unify all sessions in a day for road tests (in which no track is identified).

  • 2022/01/27 Fixed bug on naming math channels, that could prevent a math channel to be created.

  • 2022/01/26 Fixed bug upon usage of certain math functions (atan2, gear, bandpass, lowpass and highpass), that could prevent a math channel to be working.

  • 2022/01/24 Fixed bug in profiles, that could generate false channels.

  • 2022/01/23 Fixed bug for which false spikes (on smooth data) could be generated in time/distance plot.

  • 2022/01/21 Fixed issue that caused the generation of fake spikes in the time/distance plot.

  • 2022/01/21 Fixed bug for which the run performance dialog in the Dragster mode was not behaving correctly.

  • 2022/01/17 Bug fix for analysis SmartSync, that could misbehave in case of bad GPS coords.

  • 2022/01/17 Bug fix in weather management for sessions (the time of session is now correctly managed).

  • 2022/01/17 Added ‘Lap’ column header in channels report.

  • 2022/01/07 Fixed drawing issue in channels report.

  • 2022/01/06 Junior dragsters can have the shift rpm, the rpm 1:1 and the reaction time shown on the time/distance plot.

  • 2022/01/06 In Time/distance, for dragsters, when time slip information is populated, the ‘tab’ key moves the cursor at time slip times.

  • 2022/01/06 Added possibility to sort channels report items.

  • 2022/01/05 Fixed bug for which all data imported from simulators wrongly featured iRacing icons.


  • 2022/02/24 Management of the maximum number of enabled channels of an ECU / CAN2 protocol when saving a configuration. A red warning message informs the user of this behavior when the enabled channels exceed the maximum number.

  • 2022/02/23 Fixed same bugs on default values for multiposition channel mode.

  • 2022/02/23 When editing data for a multiposition channel now duplicated data are in red color.

  • 2022/02/21 To avoid flickering problems spacing has been reduced in the tooltips showing measure information of a DBC protocol.

  • 2022/02/18 Fixed bug about SW4 Button Channels configured as Multiposition.

  • 2022/02/17 Fixed bug about enabling the “Transmit” button for configuration.

  • 2022/02/17 Fixed bug about updating a condition on a Button channel when a status value of the channel is changed.

  • 2022/02/08 Fixed bug on status variables or button channels in case values for rest status or active status are changed.

  • 2022/02/08 Bug fix about status variables for channel.

  • 2022/01/28 Display: improved display of the channel list with many items

  • 2022/01/28 Fixed bug in updating display channels after modify channel names (i.e. for keypad names)

  • 2022/01/25 Fixed bug about single LED mode of predictive time LED bar.

  • 2022/01/24 Fixed bug about “Transmit” button that always started as enabled opening a configuration.

  • 2022/01/21 Fixed bug when deleting a math channel used in display that could generate errors.

  • 2022/01/20 Fixed bug in “not set” display channels that could initially be displayed with inconsistent values.

  • 2022/01/13 Fixed bug about gain and offset and measure unit read by DBC protocol file. It could happen depending on the local numeric settings.

  • 2022/01/07 MXL2 page property dialog: fixed bug that always shown all selected.

  • 2022/01/05 Fixed bug that could lead to show a message of ‘internal error’ in display tab while loading old cfg.

Live Measures

  • 2022/02/18 Fixed channel names for MyChron5, when language is set to a language different from English.


  • 2022/02/18 Given the introduction of Analysis3 this window has been hidden/suppressed.


  • 2022/02/18 Fixed tooltip for downloaded file.


  • 2022/02/09 Fixed WiFi network detection problem due to possible networks with no name, that could generate sluggishness in software behaviour.

  • 2022/02/07 Bug fix, upon device WiFi disconnection, of an unmanaged behaviour of the connection that led to an exception. The exception was managed, now is avoided.

  • 2022/02/07 Bug fix, upon SmartyCamHD disconnection, the kill of live view couldn’t be always properly managed.

  • 2022/02/07 Busy WiFi devices management has been improved.

  • 2022/02/02 Improvement of error reporting for FTP/HTTP connections.

  • 2022/01/21 Fixed possible crash while sending a configuration and at the same time looking at the live measures of the same device.

  • 2022/01/20 Fixed issue for which the icon stating the connection of any device wasn’t working in case of devices using standard USB drivers.

  • 2022/01/20 Fixed issue affering a possible flicker of the live measures window after rapidly and repeatedly connecting/disconneting devices.

  • 2022/01/19 Fixed possible missing reconnection for SCHD after firmup operations.

  • 2022/01/18 Fixed memory leak for SCHD.

  • 2022/01/18 Fixed missing connection for SCHD on Windows 11 (after Gen 15, 2022 Windows update).

  • 2022/01/18 Fixed some crashes that occurred, on Win 11, after connection and reconnection of SCHD and other devices.


  • 2022/02/11 Fixed issues importing numeric data from text in Operating Systems of languages different from US english.

  • 2022/01/28 Bug fix: the language choice dialog wasn’t shown.

  • 2022/01/27 Added support for languages and translations.


  • 2022/01/20 Added the log of std USB drivers installation, to better understand possible failures.


  • 2022/01/17 Fixed crash that could occur while creating a track map.


  • 2022/01/17 Added imperial units of measure for torque channels.

3.51.20 - January 5th, 2022


  • Fixed the USB drivers installation, that featured ‘inf’ files with bad line ending (LF instead of CR+LF).


  • 2022/01/04 Fixed default zoom level and zoom reset for dragster runs.

  • 2022/01/04 Fixed some default math channels (i.e. CVT) for junior dragsters that stopped working.

  • 2022/01/04 Some fixes for the dragsters shading of time plot.

  • 2022/01/03 Some bug fixes to the DB window.

  • 2022/01/04 Bug Fix: the file conversion options were no more working correctly (i.e. advanced settings for sim data import).

  • 2021/12/17 Fixed management of number of reference slices, that now is saved into profiles.


  • 2022/01/04 SaveAs for Keypad: fixed bug that could reset the bitrate protocol to default value (125Mb/s).

  • 2022/01/03 SmartyCam HD: fixed bug in measure setting for UDM and end scale. Upon cfg reopen, the data was reset to default value.

  • 2021/12/22 Expansions: corrected max expansions number for all devices.

  • 2021/12/23 MX2E: fixed bug due to multi-state icons that may not work correctly.

3.51.19 - December 20th, 2021


  • 2021/12/15 Fix in split report lap rows, when drawing the distance in split the distance was duplicated over split time.

  • 2021/12/15 When a file is sent for AiM support, there’s no more confirmation, in the support website, for files correctly sent. There’s only a message upon files possibly not sent.

  • 2021/12/15 The maximum number of sessions in DB preview window features now a limit of 5.

  • 2021/12/10 Fixed run week days in sessions DB (formerly all days were sundays).

  • 2021/12/09 Fixed issue when loggers append GPS samples before updating the GPS channels configurations.


  • 2021/12/20 For MXm it’is now posible to configure also Channel Expansion, TC Hub and Shift Light Module.

  • 2021/12/17 CAN output. Fixed a bug when using a static hexadecimal value for a single byte selection: data was shown in decimal value.

  • 2021/12/16 Fixed a bug disabling a status variable for which all alarms based on status variables lost the correct reference to them.

  • 2021/12/15 For MXm default colors of the predictive bar are now green for better times and yellow for worse times.

  • 2021/12/15 Fixed bug on acquisition frequencies allowed for status variables.

  • 2021/12/10 Managing of custom colors for predictive time bar.

3.51.17 - December 6th, 2021


  • 2021/11/30 Bug fix to better manage split report when one only lap is available.

  • 2021/11/30 Bug fix while updating tracks, for which some modifications could be missed by the track engine.

  • 2021/11/30 Bug fix for the lap summary preview that could generate a crash.


  • 2021/12/01 Fixed a bug on channels created by default with inconsistent condition parameters (for instance the bug about color condition of keypad channel of PDM).

3.51.16 - November 27th, 2021


  • 2021/11/26 Fixed bug drawing channels names in time/distance plot.

  • 2021/11/26 Some improvements to channels report graph.

  • 2021/11/26 Bug fixes to the track creation window.

  • 2021/11/26 Bug fixes in identifying tracks for sessions on open tracks.

  • 2021/11/26 Bug fixes to profiles: saving min and max values could result back to default values.

  • 2021/11/26 Some fixes to the track splits to exactly align to split lines.

  • 2021/11/25 Improvements in track report, channels report and split report.

  • 2021/11/22 Bug fixes in saving profiles.

  • 2021/11/22 Bug fixes in track report, channels report and split report.

  • 2021/11/22 Improvements to split report in case of open circuits.

  • 2021/11/18 The two windows composing the Track Report layout have been split into: “Channels Report for Selected Split” and “Track Map for Selected Split”, and are now separately usable.

  • 2021/11/18 Added windows types: “Channels Report Graph”, separated from “Channels Report”.

  • 2021/11/18 Improvements in drawings and colorings in channels report, track report and slit report.

  • 2021/11/18 Improvements to track recognition when fw laps are not available.

  • 2021/11/18 Improvements to track recognition in case of open circuits.

  • 2021/11/12 Fixed bug for which RS3 could give a wrong ‘all ok’ message upon failing sessions export.

  • 2021/11/12 Added possibility to show histograms in list for split report, channels report and track report.

  • 2021/11/12 Improvements in track report and channels report colorized mode.

  • 2021/11/11 Improved channels report ans track report coloring.

  • 2021/11/11 Fixed lap number formatting in plot for preview lap summary and split analysis.

  • 2021/11/11 Fixed missing tooltip in split analysis plot.

  • 2021/11/10 Fix to channels report and track report, that could generate bad data in case of multiple sessions loaded.

  • 2021/11/10 Fix to default distance math channel, that could be imported but not used for enabling distance mode.

  • 2021/11/10 Fix to channels settings window, that could lead to channels colors not properly managed.

  • 2021/11/09 Bug fixes in math channel engine (to better handle a div by zero).

  • 2021/11/09 Bug fixes in the management of the split report and the split analysis (some inconsistencies in coloring).


  • 2021/11/25 PDM: Fixed bug in display settings dialog, that wrongly showed the scrollbar.

  • 2021/11/25 Fixed bug when creating or modifying a status variable, that wrongly copied the status variable in all display channels.

  • 2021/11/16 Enabled configuration of 5 inch display for PDM32 and PDM 08.

  • 2021/11/16 Fixed bug about updating condition on status variables or power outputs or button channels when they are changed.

  • 2021/11/10 Bitrate indication of first version ECU protocols is no longer shown as it was wrong.


  • 2021/11/10 Better management of dragster tracks, that used to show a length that wasn’t correct.

3.51.10 - November 8th, 2021


  • 2021/11/08 Fixed bug for which in some cases the track creation window couldn’t scroll to its bottom.

  • 2021/11/08 Fixed bug for which, when loading a profile between opening two sessions, you could have two tabs for the same track.

  • 2021/11/08 Fixed some channels functions in importing/parsing files from simulators.

  • 2021/11/05 Fix in importing/parsing files from simulators (iRacing, ACC, AC): some channels were badly converted.

  • 2021/11/05 Bug fix in math channels window that could delete the distance channel (open the math che window again, now, to have it back).

  • 2021/11/04 Fix in advanced information preview window: some devices featured a wrong name.


  • 2021/11/05 SaveAs: CAN Output is now correctly saved.

  • 2021/11/05 Rotary setting: fixed bug when updating channel data. Now in LED color settings, RS3 shows updated channel labels.

  • 2021/11/05 Fixed bug about default operation for condition on MXsl power output.

  • 2021/11/04 Fixed bug about default operation for condition on button.

  • 2021/11/04 Added check box to hide window for locking features. Reset of this option is possible by menu Preferences/Software Behavior/Automation.

3.51.08 - November 3rd, 2021


  • 2021/11/03 Installer now goes on installing RS3 also if the prerequisites installation wrongly reports a failure.

  • 2021/10/12 Added dialog window to choose intallation path, and manage the case in which previous RS3 is installed in a non AiM standard path.

  • 2021/10/12 Managed the case in which users pin RS3 icon to Windows Taskbar.


  • 2021/11/03 A couple of crash fixes in preview window.

  • 2021/11/03 Fixed save/load of the profiles, that was buggy in case some panel was set to hide with space bar.

  • 2021/11/02 Fixed import/export of splits for tracks.

  • 2021/11/02 Fixed crash in right clicking time/distance plot in case of session with no GPS samples.

  • 2021/11/02 Fixed bug for which a channel could disappear from time/distance plot.

  • 2021/10/29 Fixed track export issue.

  • 2021/10/29 Fixed Best Rolling Lap in Split Report.

  • 2021/10/29 Some fixes in math channels management.

  • 2021/10/26 Fixed manufacturer request for Lotus: it could hapen that a request stored on the PC couldn’t be processed by AiM server due to the fact that the device was waiting for registration.

  • 2021/10/25 Some fixes and improvements in analysis icons.

  • 2021/10/25 Added user message when for a session the distance mode is not available and the user tries to switch in distance mode.

  • 2021/10/25 When saving an old user track (not featuring time zones info) now time zones information is copied by the closest track available on the PC.

  • 2021/10/25 Bug (crash) fix in time/distance view that could originate while setting plot separators.

  • 2021/10/25 Managed possibility to set dragster run number when they’re shown as odometers (only for dragster devices).

  • 2021/10/25 Fixed sector division when there is only 1 sector.

  • 2021/10/25 Fixed freeze in math channel creation when double quotes are wrongly placed added function to identify channel functions in math channel formulas.

  • 2021/10/25 Fixed track report, for ‘hiding’ slices bound data under AiM track. Now AiM track is on the back of all things drawn.

  • 2021/10/25 Fixed settings of channels, for verification of scales being multiple of step value.

  • 2021/10/25 Bug fixes on math channels.

  • 2021/10/22 Some fixes affering a possible wrong resize of many windows when hitting the space bar.

  • 2021/10/22 Fixed bug in channels report, for map disappearing when hitting the space bar.

  • 2021/10/22 Several bug fixes in math channels.

  • 2021/10/21 Fix in track/channels report not correctly showing laps without splits.

  • 2021/10/21 Fixed drawing of split marks in time/distance plot.

  • 2021/10/21 Added some channels managed/imported into Assetto Corsa Competizione stream files.

  • 2021/10/21 Some fixes in math channels (among others, added checkbox for stepped values).

  • 2021/10/21 Fixed drawing of split marks in time/distance plot.

  • 2021/10/21 Fix in track/channels report not correctly showing laps without splits.

  • 2021/10/20 Fixes in the management of default colors.

  • 2021/10/20 Improvements in the management of session comments.

  • 2021/10/20 Bug fixes for wrong message forbidding the ‘apply’ button for erronwous step value.

  • 2021/10/20 Main analysis DB: a minor fixes in agenda view.

  • 2021/10/20 Bug fix in tracks/channels report side channel selection.

  • 2021/10/20 Added possibility to select best lep, best 3 laps, best 5 laps.

  • 2021/10/20 Fixed statistics in split report.

  • 2021/10/19 Profiles: fixed mixed channels settings and slice colors, that were saved but not read.

  • 2021/10/19 Scatter plot, added the possibility to show a circular grid (useful for GG diagram).

  • 2021/10/19 Profiles: fixed mixed channels settings and slice colors, that were saved but not read.

  • 2021/10/19 Scatter plot, added the possibility to show a circular grid (useful for GG diagram).

  • 2021/10/18 Modified the maximum number of plots in every single view, mostly to allow up to 8 scatter and histogram plots.

  • 2021/10/18 Fixed missing management of track report cursor while moving cursor in time mode (was instead working in distance mode).

  • 2021/10/18 Fixed minimum splitter position in track report.

  • 2021/10/18 Fixed horizontal scrollbar in channels report and split report.

  • 2021/10/14 Fixed missing management of line size in scatter plot.

  • 2021/10/14 Some fixes in Math Channels dialog window.

  • 2021/10/13 Some fixes in drawing colors of channels report and track report.

  • 2021/10/13 Plots now feature a thicker grid line for the tick with zero value.

  • 2021/10/13 Fixed volume units conversion in RS3A.

  • 2021/10/12 Fixes channel setting dialog, that erroneously showed an edit box.

  • 2021/10/12 Added total session distance and duration to preview info window.

  • 2021/10/12 Some fixes into the profiles (that occasionally were loading wrong scales).

  • 2021/10/12 Fixed double click on plot axes for time/distance plot, scatter plot and histograms.

  • 2021/10/12 Some fixes to histogram: management of value tags colors and decimal places.

  • 2021/10/12 Fixed signum in GPS Slope channel.

  • 2021/10/08 Improved Channels Report and Track Report.

  • 2021/10/05 Fixed bug in drawing routines that could generate false down-spikes in time/dist and storyboard.

  • 2021/10/04 Fixed bad initial refresh of main analysis toolbar.

  • 2021/09/29 Fixed missed redraw bug upon resize of time/dist and of storyboard.

  • 2021/09/29 Fixed bug that could forbid GPS acceleration data computations (possible with some GPS-05 receivers).

  • 2021/09/29 Fixed bug in the selection of the X channel for scatter plot.

  • 2021/09/29 Fixed the feedbacks function that erroneously generated on the website message stating all files were sent when no file was supposed to be sent.

  • 2021/09/23 Fixed refresh of shown slice label when resetting the zoom to the whole lap.

  • 2021/09/23 Fixed bug in saving plots positions in time/distance window.

  • 2021/09/21 Fixes to axes mouse move-drag-wheel events for time/dist, histogram and scatter plots.


  • 2021/11/03 Fixed bug about loading display with many pages.

  • 2021/11/03 Fixed bug about finding channel that could be change display measure with another one.

  • 2021/11/02 Fixed bug about channels used by CAN Output that sometimes were changed opening a configuration.

  • 2021/11/02 Enalarged column Model in Custom CAN Builder and added tooltips for all columns.

  • 2021/10/28 Fixed bug about coded value of Power Output Half Bridges shown when used in a condition.

  • 2021/10/26 Fixed bugs about allowed operations and usable values in condition on Status Variables or Power Output Channels.

  • 2021/10/26 K type thermocouple sensor are no longer configurable for PDM devices.

  • 2021/10/21 Fixed bug where RS3 crashed deleting a Status Variable.

  • 2021/10/21 Fixed bug for which sometimes ECU protocol channels used in the conditions or by display objects or by CAN Output were replaced by those of CAN2 protocol.

  • 2021/10/21 Display: allowed units of measure for “time” channels.

  • 2021/10/14 Fixed memory leaks about multi channels configuration importing protocol from DBC file.

  • 2021/10/13 Fixed bug about saving frequency and unit of single measure importing a protocol by DBC file.

  • 2021/10/13 Fixed bugs that could cause button ‘Add’ not to properly work while defining a complex condition.

  • 2021/10/13 Fixed bugs related to Hysteresis window and threshold values configuring condition on a channel.

  • 2021/10/13 Added message disabling general use of keypads to warn that the configuration will be permanently lost.

  • 2021/10/12 Fixed a bug that could cause the software to crash modifying a protocol in CAN-Builder.

  • 2021/10/08 Fixed bug about check-boxes “Enable the CAN Bus 120 Ohm Resistor” and “Silent on CAN Bus”.

  • 2021/10/08 Fixed minor bugs about warning messages.

  • 2021/10/04 Fixed bug in pullup resistors for digital status channels.

  • 2021/10/02 Fixed bug about “Search Box” label that could be positioned incorrectly.

  • 2021/09/22 Added new Output Commands to reset counters: Odometer (1,2,3,4 )and fuel level. Firmware update is required.

  • 2021/09/28 Icons: now it is possible to manage up to 10 images (before it was limited to 6).

  • 2021/09/20 Custom Sensor: fixed possible crash when creating new sensor.

  • 2021/09/28 MX2E: fixed bug sending the configuration, as in some cases the process erroneously timed out.

  • 2021/09/28 MXL2: fixed possible error when loading new page.

  • 2021/10/04 MXK10: increased number of LambdaCAN e ChannelExp that can be added (up to 4).

  • 2021/10/04 SW4: trigger command for push buttons… checks the fw version before to transmit cfg.

  • 2021/09/28 SW4: possible errors could occurs when saving and using trigger commands activated by push buttons.

  • 2021/09/20 SW4: improved access to the display MENU (Firmup needed). Now, you just choose the pushbutton for entering the menu, then the four pushbuttons near the display let you move through the pages, independently from their configuration.

  • 2021/09/20 SW4: multiposition window… corrected the drawing of the last element.


  • 2021/10/22 Added units in/s for suspension speed.

  • 2021/10/02 Fixed bug in redraw upon maximizing RS3 main window.


  • 2021/10/29 Some fixes for ensuring Time Zone and DST information in all user tracks.

Communication and Live Measures

  • 2021/10/06 Fixed possible missing reinit of live measures upon sending a configuration.

  • 2021/09/23 Fixed possible flicker and crash while continuously connecting/disconnecting devices.

3.50.95 - September 22th, 2021


  • Added possibility to sum slices in the histogram.

  • Fixed colors of slices in storyboard.

  • Fixed crash due to infinite loop after deletion of the storyboard.

  • Improved autorange for channels in plots.

  • Bug fix: the split analysis window didn’t correctly react to profile main theme color change.

  • Fixed drawing of selected rows in Sessions DB.

  • Fix to corrupted split report after selecting a different sector sequence.

  • Fix to download “error while parsing files”.

  • Fix to tracks updates that could lead to crash when having RS3 initially connected to the web and loosing the connection right while updating tracks.

  • Fixed management of the timer that controls the end of the session import process: it could trigger a useless refresh before import completion.

  • Fixed bad lap number shown in some windows in place of lap label.

  • Fixed lap number in preview laps report page.

  • In case users import a number of sessions that’s greater than 30% of already existing sessions the ‘new’ state is not shown.

  • Fix of a scroll problem in story board view.

  • Fixed scatter plot that could be plotting square shaped points instead of circle shaped points.

  • Introduced pixel subsampling of all graphics (plots and maps) to avoid calling drawing APIs on useless points.

  • Some further work to speed up graphics.

  • Switched in plots drawing routines (roughly 2x speed) to using integer drawing APIs instead of floating point APIs.

  • Mini fix in maps and plots drawing routines (roughly 2x speed) avoiding to draw point when their size is not greater than line thickness.

  • Fixed track map population that was missing when a track map window is added to a profile.

  • Added possibility to view comments in advanced info window.

  • Channels Report now uses the chosen unit of measure and number of decimals.

  • Columns in Channels Report have a fixed order, and do not depend anymore on how they were added.

  • Fixed drawing glitch in channels list.

  • Fixed progress bar for session import dialog window.

  • Fixed bug in drawing of slices being dragged.

  • Fix use of mouse pad for horizontal scroll in split report and channels report.

  • Bug fix in measure settings: decimal figures and custom scaling.

  • Improved data import reliability upon clicks on ‘Cancel’ button.

  • Bug fixes in cursor and delta management.

  • Improved cursor accuracy in case of data+video sessions.

  • Fixed bug in batch conversion, for which gpk files were not generated in case ‘merge’ checkbox was flagged.

  • Fixes in the mouse interaction for plots (time/dist, scatter, histogram).

Custom Sensors

  • Fixed possible crash when creating new sensor.


  • Save As: fixed bug in Status Variables (were not copied) and Parameters (Reference Speed was not copied).

  • Save As: Restored user error messages.

  • Save As: Fixed bug that could generate wrong copy of button data.

  • Save As: Fixed bug that could not copy all configuration data.

  • Save As: Fixed bug when using Custom ECUs.

  • Fixed bug for which sometimes, upon connecting a device, clicking the first time on the device row, wouldn’t show the device.

  • Fixed bug about maximized windows that could be overlapped by the system application bar.

  • Improved access to the display MENU (Firmup needed). Now, you just choose te pushbutton for entering the menu, then the four pushbuttons near the display let you move through the pages, independently upon their configuration.

  • SW4: Multiposition window: correct drawing of the last element.

  • SW4: Rotary settings: fixed bug in last position (shown truncated).

  • SW4: Shiftlight module can now be added.

  • SW4: Fixed crash when setting button LED color.

  • SW4: Enabled only GPS lap detection.

  • SW4: Paddleshift channels: now work only as “momentary”.

  • SW4: Fixed bug about saving data of Multipositon Button.

  • Channel Settings: fixed vertical dimension for dialog window.

  • PDM: ShiftLight and Alarms: fixed bug in device image showing truncated.

  • PDM: Pullup resistor available for all sensors.

  • Fixed date format in configuration to fit available space.

  • Fixed Windows 7 bug when configuring display pages using fonts incompatible with that SO.

  • Fixed bug in setting alarm condition for digital status channel: ‘equal to’ and ‘different from’ can now be set.


  • Fixed bug for which SCHD and SD cards didn’t show the number of laps and the best time any more.


  • The warnings formerly shown into devices list are now shown as a tooltip in the “Connected devices” item.

  • Fixed bug: now past warnings are no more shown upon closing the network connection.


  • Fixed error parsing files, due to bad conversion of xrz into xrk.

ECU Protocols

  • Added possibility to import DBC Files.

  • Fixed bug in deleting alarm that could close the software.

  • Fixed bug about CAN protocol managing.

  • Update of CAN protocol files to fix some bugs.

  • Fixed bug in ECU protocols index management.

Web Updates

  • Fixed bug that could prevent the firmware update from running.

3.50.81 - July 30th, 2021


  • RS3 now forbids, at the very first run, opening main analysis window and main tracks window until track database has been populated.

  • Fix to main progressbar drawing to avoid a side glitch.

  • Added Possibility link data and video sessions manually.

  • Fixed bug for which in some (very limited) cases RS3A was unable to associate a track to a session, generating also a task remaining up after RS3 closure.

  • Fixed drawing bug meaningful channels.

  • Added possibility to show/hide plot axes.

  • Improved coloring management for all plots.

  • Fixed bug in split report computations.

  • Improved scatter plot coloring.

  • Fixed, in laps list, the indicator of chosen lap, to avoid it showing multiple laps selected.

  • Fixed time compare delta rate and delta average.

  • Fixed bug in generation of tdms files (National Instruments TM), that were added also into batch conversion window.

  • Fixed bug in parsing xrz files.

  • Improved responsiveness of redrawing operation in all windows.

  • Fixed bug for which there was the wrong possibility ro resize windows hidden by space bar.

  • Improved responsiveness of mouse move on time/dist.

  • Improved click detection in draggable tab controls (formerly a click could be misinterpreted as a drag start event).

  • Fixed memory usage issue in GDI+.

  • Fixed RS3A DB import while downloading xrk files merged into one drk (RS3A never merges as it features GPS time mode).

  • Fixed management of time compare delta in time/dist view.

  • Fixed bug for which, upon zooming on the first or last split, a new doubleclick wouldn’t bring back to the entire lap.

  • After the import phase the sessions just imported have been highlighted.


  • PDM online: detected configured display type and used in managing logo size. New fw is required

  • Display tab: keep of channel selection when drag and drop occurs

  • Fixed bug when saving channel that shows warning icon for channels that were ‘not set’

  • Status Variable: cleaned the dirt in the left margin

  • PDM: When the Icon tab is clicked and no display is selected. Fixed bug that didn’t show the select button

  • SW4: improving in GUI. Unique dialog for channel and led color settings.

3.50.76 - July 16th, 2021


  • Improved delta management.

  • Sessions database now saves search filters.

  • Fixed bug importing drk files.

  • Fixed bug for zoom at split that wasn’t working in all cases.

  • Fixed bug for which two movie windows were erroneously open when two consecutive moves were available for a single session.

  • Fixed bug for which the play buttons in the movies were wrongly left disabled.

  • Fixed bug for which the cursor in the movies could result badly placed upon adding a lap.

  • Sessions just impoerted now are highlighted with a ‘new’ icon.

  • Fixes in track map dialog.

  • Fixes in math channels application dialog.


  • Fix to configuration transmission to MX2E.

  • Changed LED numbering for Mygale SW (as requested by firmware).

  • Bug fix on SW that didn’t store a short label change.

  • Minor fixes and improvements on import of DBC.


  • Fix to session best lap time shown in download window.


  • Feedbacks and uploads to AiM support now allow a better control upon files being uploaded, and inform users upon a possible call to support when not logged in.


  • Fixed drawing of track directions.

  • Fixed bug in redrawing of the hot track, that could result in drawing no line.

  • Fixed bug in creation of a new map, that could be impossible when trying to create a map made of only beacons.

3.50.71 - July 9th, 2021


  • Fix in computations in weather dialog window.

  • Introduced possibility to change the selected map and the split division for loaded sessions.

  • Bug fix: recover of the zoom functinality after having zoomed in too much.

  • Bug fix: upon opening a session the profile could result in being empty.

  • Bug fix: RS3Analysis could generate a crash removing a window from a profile.

  • Added possibility to export the shown chunk of videos.

  • Scatter plot now is cross interpolating x and y channels (data points are more precise for users).

  • Added icons to scatter plot (color channel, choose X channel).

  • Fixed tooltip for export of files.

  • Fixed bug for which, pressing righ/left buttons in a window other than RS3 you could move analysis cursors.

  • Fixed management of space bar when focus is in an edit control (for example space bar).

  • Fixed tooltip in histograms toolbar.

  • Fixed bug for which, in case of no GPS data trace, the color of the message informing users in track map window was mistaken.

  • Fixed bug in zooming a data slice while in “snap on + timed + zoomed storyboard”, it could lead to an unwanted lap shift.

  • Fixed buggy zoom out in “time/dist + time”, that didn’t stop at the session length.

  • Added Import of race Studio Analisys Math channels

  • Fixed import of MOV files without GPS data

  • Fixed display of web maps when no route is available


  • Support request button in configurations and in sensors is shown only if user is correctly logged in.

  • Fixed error management in converting lat/lon/alt values (only in case these values are in error).

  • Some typos were fixed.

  • Fixed bug in live measures conversion of latitude and longitude (only for SmartyCam and only for negative values).

  • Fixed bug in live measures conversion units.


  • SmartyCam HD 2.2: fix when using ECU that could not be sent to device.

  • General improvements in PDM configuration user interface.

3.50.58 - June 24st, 2021


  • Fixed bug in zooming a data slice while in “snap on + timed + zoomed storyboard”, it could lead to an unwanted lap shift.

  • Fixed buggy zoom out in “time/dist + time”, that didn’t stop at the session length.

  • DB import now avoids to loose time checking files with an unsupported extension

  • Some fixes in the management of units of measure in weather and log-sheets


  • Fixed bug live measures conversion units.


  • Fix in infoline configuration: it allowed a change that culd generate display errors on devices.

  • Fix in font management in device pages, that could make the receive/transmit of the configuration extremely slow

CAN Builder

  • fix for buttons in main protocols DB that could result in being hidden

3.50.53 - June 15st, 2021


  • Added support for Junior Dragsters, with dedicated preview window and log sheet view available in analysis page.

  • Some fixes to the automatic splits sequences computed by software, to manage two consecutive corners on the same side, even it they have different cornering radiuses.

  • While importing xrk or mov files, RS3A automatically recognizes reverse tracks.

  • General improvements in the syncronizatino engine of all GPS/data/video streams.

  • Fixed bug for which in the database list sessions could be shown with the most recent at the bottom instead of at the top.

  • Some graphic improvements and bug fixes in the plots (time/dist, scatter, histograms).

  • Fixed some crashes in channels report that could occur upon channels with few or no samples.

  • Fixed, in channels report, the horizontal scrollbar that automatically appears in case of many items shown: it could appear with wrong size.

  • Fixed bug with wrong sizing of video windows while loading profiles.

  • Fixes message informing users upon missing video files, that in some cases could not appear when needed.

  • Web mapping is now quicker, as we managed in avoiding some useless computations.

  • Tooltip can be disabled for track maps.

  • Avoiding, in scatter plot, to show by default as Y a channel used in X.

  • Fixed bug for which, while zooming, a zoom reset button wasn’t effective.


  • Fixed bug for which, upon failure in convertion of the xrk file in an extended format (tms, kml, csv, or others) the RS3 was stating ‘error creating drk files’ even if drk were correctly created.


  • Small improvements/fixes in live measure values.

  • Added support for M5-bike-performance.

  • Added some computed values to those already available in weather forecasts and historic weather.

  • Some improvements to RS3 logging system.

  • Flat toolbar buttons are a new default.

  • In the login dialog the ‘tab’ key correctly switches between user name and password.

  • In the device use info page, as well as in the download window, it’s now possible to manage dragsters race modes and vehicle types.

  • Improvements to avoid RS3 locking while closing (as from feedbacks).

  • Fixes to distance unit of measures, that could appear (in limited cases) with the wrong decimal number.

  • Fixed dialog window for units of measure: it could generate a false duplicate of units.

  • Fixed some memory leaks closing the RS3.

  • Fixed ‘out of range’ problem on empty strings in some edit boxes.

  • Fixed a couple of typos.


  • Small fix in nation management for tracks, to fix the issue with two tracks appearing as of an ‘unknown’ nation.

  • Small fix while writing user tkk files, that could result in being without time zone info (AiM tracks not affected by this bug).

  • Tracks updates are not being applied automatically: now they require user interaction.

  • Fixed flicker in (tracks) weather forecast window, that continuously refreshed in case of no track selected.


  • Some improvements in the possibility to select internal/external pull-up resistance in custom sensors creation (for devices supporting it).

3.50.52 - May 21st, 2021


  • Bug fix for OEM Mygale steering wheel.

  • Fixed bugs for PDM power output.

3.50.48 - April 6th, 2021


  • Fix to WiFi choice menu, in which AiM devices could be erroneously placed into other networks. Notice: this NOT being a bug in communication but only a user interface menu sorting.

  • Improved WiFi device scan speed for AiM devices when RS3 is running on a virtualized Windows.

  • Start of WiFi connection has been made quicker.

  • Fix to FastLap export format.

  • Improved WiFi password verification function device window.

  • Fixed a couple of crashes that could happen while closing RS3, this generating a RS3 instance to be closed using TaskManager.

  • Introduced a WiFi warning icon to inform users when they’re possibly connected to two networks sharing the same IP addresses.

  • A couple of modifications were made to avoid useless RS3 logs.

  • OEM device added.

  • Minor graphical improvements (flickers) eliminated avoiding some internal references to apparently unused openGL graphic libraries.


  • Fixed bug in xrk parsing. Some GPS samples could result as missing upon crossing GPS week change.

  • Fixed bug for which, downloading an xrk file with ECU locked channels, those channels were missing in the drk file also in case the protection password was installed. Notice: the xrk2drk utility was instead perfectly functional.

  • Fixed bug that forbade a correct filtering for GPS Accelerometers in conversion to DRK.

  • Now users can decide if to create drk files or not while downloading MOV files. This should avoid an apparent sessions duplication in RS2A.

  • Fixed session date shown for MOV files in download window.

  • Minor fixes (memory leaks).

  • Minor bug fixes and improvements in parsing simulators data (AC+ACP+rF2), and added some tracks to those that are converted to true GPS tracks.


  • New PDM32 Half Bridge channel management in High Side and Low Side mode.

  • New Full Bridge mode for PDM32 Half Bridge channel pairs.

  • Configuration of PDM inertial platform (accelerometers, gyroscopes and magnetometers) based on the device position relative to the vehicle.

  • Improved font and icons display.

  • Fixed bug that caused some CAN protocols with particular features to malfunction.

  • Fixed bug that caused the failure to send the CAN2 None protocol to the device.

  • Fixed bug about the Save As operation of a configuration.

  • Fixed possible bug about BitComposed math channels.

  • Fixed bug in SmartyCam stream that could result not keeping channels previously set.

  • Fixed show/hide status of the search box, that could remain erroneously shown.

  • Fixed bug in dialog used to modify font dimension.

  • Fixed bug in Goto Page number and channels available.

  • Cloning configuration: removed double message when ending operation.


  • From now on also when creating a track from scratch all information about time zone and DST are downloaded from the AiM web service and added to the newly created tkk file. In case there’s no internet connection available the timezone and DST information are taken by the closest track.

  • Fixed a bug for which tracks were not deleted from trash.

Web Updates

  • The list of the updates is sorted by most recent date of the update on the AiM server.

  • Before uploading the firmware to a device users of dev and beta are prompted a warning window informing them that also firmware in these releases must be considered dev or beta.


  • Fix to split report that could be generating bad split times.

3.50.38 - February 16th, 2021


  • Fixed crashes while closing RS3 during login process.


  • Fixes in the split identification.

  • Slight improvement of smart sync algorithm for time/distance plots.

  • Improved refreshes operations (quicker and more effective) among analysis windows upon several user interactions.

  • Improved x axes and cursor management in time/distance plots, now resetting to zero after a lap change.

  • Added possibility to select all laps or best lap.

  • Improved speed of web mappings window.

  • Some modifications in the main DB page (mainly the preview window can be placed at right side or bottom side).

  • Splits and sectors can be shown on the map.

  • A limit has been introduced to the number of reference slices (2 or 4) that affects channels tags in plots and cursors on map.

  • Selected sector has been introduced in laps toolbar (the sector where the cursor is placed).

  • Added possibility to manage the cursor in scatter plot.

  • Fix in import of *.act files.

  • Fix in import of *.dbn files.

  • Fixed mananagement of “negative” lap-times strings (laptimes differences).

  • Fixed management of track sectors (renaming, but mostly moving and and deleting coud lead to crashes).

  • Fixed software computation of lap times in case of, unlikely but possible, wrong GPS samples.

  • Fixed crashes in preview window upon quick random selection of sessions.

  • Fixes in computation of split times report.

  • Fixes in default values of panels while creating profiles.

  • Fixed management of movie cursors when the movie stops before the end of data or starts after data begin.


  • Fixed minor bugs and memoryleaks about math channels, status variables, keypad channels and PDM channels.

  • Fixed a bug for whereby sending a configuration with the keypad disabled to a PDM it could continue to manage keypad previously configured.

  • Correction of the message informing that selecting the size of 1 byte the value of the CAN Output channels could be truncated.

3.50.36 - February 1st, 2021


  • Fixed bug that (due to a wrong management of a timeout from an external API) could make RS3 be very slow.

  • General improvements on the management of files with names or placed in paths written with not ASCII chars.


  • Fixes in the split identification.

  • Improvement to the SmartSync routine to make it more effective upon uncomplete laps.

  • Improvements in the import of files into the database, in order to assure a high reliability and better (shorter and more clear) messages to users.

  • Fixed some bugs on audio management in videos.

  • Improvements in plots, for example: slices dragging, coloring of channels report.

  • Fixed a couple of bugs for which some distance could be plotted only using meters (instead of feet).

  • Bug fix in profiles that badly managed some data like for example mixed plot number.

  • Erase and cleanup operations on the database now feature a wait window.

  • Light changes in the DB user interface.


  • Fixed bug converting xrk files into drk files.

  • Added export in FastLap format.

  • Fixed bug in export in SCCA csv format.


  • Fixed bug that might freeze the software when importing/opening configuration.

  • Fixed bug that forbade the visualization of some channels into SmartyCam videos.

  • PDM: Managing of keypad on CAN2 bus together with pther protocols.

  • Alarms multistate (used for PDM and the like): managed Colors both for PopUp and Message (as infoline).

  • Ouput Command: fixed bug in opening settings.

  • Ouput Command: fixed bug that crashed software when clicking button to add new without having a display (PDM).

  • Math Channel: managed “Distance” function for odometer operations.

3.50.33 - December 24th, 2020


  • Added the Split Report Layout.

  • RS3 allows users to execute it also if not logged in, given that all RS3A web based services are not functional.

  • Track map now always shows a greyed track map, while allowing the view of zoomed data.

  • Track map coloring routine has been improved: map can be colored using splits (as previous RS2A did) and in monoshrome for web mapping.

  • Fix for analysis cursors that could be showing different values in different parts of software.

  • Added the possibility to merge xrk files also in batch convert (as requested for s3t files).

  • Fixed bug in refreshing channels values upon a measure units change.

  • Crash and issues fixes.

3.50.31 - December 4th, 2020


  • Fixed bug for which, upon changing the cursor color, the color of the minimum alarms switched to green.

  • Fixed a wrong use of cursor color in many UI elements.

  • Fixed issue in management of M5-660.

3.50.30 - December 3rd, 2020


  • Added search bars into all windows in which a channel can be selected.

  • Fixed crash while changing a parameter value for a channel.

  • Fixed issue in channels report for which, after adding many items, the add/remove button was no more available for clicks.

  • Fixed cursor that was hidden when delta function was enabled.

3.50.28 - December 1st, 2020


  • Upgrades of Status Variables, Keypad and Power Outputs of PDM.

  • For channel of current related to power output channel, the frequency is locked to 200Hz if PWM mode or soft start/stop are checked.

  • Fixed issue about fuel consumption channel.

  • Managing of backlight colors for Blink Marine keypad of PDM.

  • Added managing of BlinkMarine Keypad with 12 keys for PDM.

  • Fixed the issue for which “Distinct Conditions” setting was lost for Power Outputs channels.

  • Fixed the issue for Power Outputs in PWM mode: buttons appeared in place of boxes to edit the status value.

  • Fixed the issue for which the backlight colors did not works for keypad with ID different from 0x115.

  • Fixed some graphical interface problems in the CAN Output window.


  • Min/Max Alarms set for channels now reflect also in time/distance and Storyboard windows.

  • Time/distance plot correctly saves the resized dimensions, including fixed height for time compare.

  • A huge number of fixes for small bugs affecting drag and drop of slices and of cursors in all the possible combinations of plot bases (time, distance and GPS time) and in all possible ‘snapping’ (on, off, condensed).

  • Time/distance plot now features also the lap ticks when in snap off or in GPS Time mode.

  • Time/distance plot now feature the possibility to ‘select’ a channel and to get tags with minimum, maximum and average values.

  • Added an improved version of delta function (with moveable base, and info shown into tags).

  • Added manipulation of splits into time/dist plot.

  • The time/distance plot now zooms at the split after a doubleclick ove the split mark.

  • Correctly managed the pressure of space bar, that affected the main analysis windows also when the user was in modal windows.

  • Settings window look and feel has been improved.

  • Fixed all the zooming possibilities in Storyboard.

  • Fixed zoom mapping behaviour in order to make it look like Google zooming.

  • Search bar in channels list now improved to manage also units like % and #, and to look for user entered strings also in channel comments. Comments are now also shown as a tooltip ove a little yellow icon.

  • Time/distance now correctly manages stepped channels (i.e. gears, satellites number, …).

  • Time/distance now features an improved zoom on axes, using mouse wheel and/or dragging axes with mouse.

  • Channels report now features: fixed date/time in splits, possibility for splits to be be shown or not, added possibility to hide or show the statistics plot (exactly like the lap summary in preview).

  • Histogram now can be drawn as lines (useful for multiple laps), has a fixed plot grid to always match with bars, shows also bar values, shows also a cursor.

  • Moview now feature a better management of sound, customizable also in the settings.

  • Enabled the XY plot.

  • Added the possibility to manage different channels in different analysis panels.

  • Added the possibility to change the color channel in the map.

  • Fixed super-bad-crash with videos, generated while randomly or quickly using the mouse wheel to zoom in and out.

  • Fixed problem with cursors and with alignment of GPS-Time/condensed mode.

  • Fixed some small bugs in dimensions of the dialog settings of channels.

  • Fixed rendering issue in web mappings, exterminating a zombie process that could hang up the entire RS3.

  • Fixed bug while changing the units of a channel, for which some windows couldn’t be reflecting/showing the change of units.

  • Fixed some crashing that could be achieved while quickly switching among sessions in the preview.

  • Fixed crash in profiles management, generated by the deletion of the storyboard.

  • Fixed crash in opening channels report due to a null pointer.

  • Improved the function that detects the first channels to be shown.


  • Fixed bug while parsing xrk files from MyChron5. Now wheel temperature channels are properly managed in the drk file.

  • Added odometers values to drk while downloading (only for new fw that support the feature).


  • Added support, both in downloading and in batch conversion, for the s3t file format.

  • Added the possibility to manage microseconds as units for some channels.

  • Fixed problem in converting/importing data from rFactor (1 and 2), session date could go back to 2000 january 1st.

Web Updates

  • Some improvements in the management of new devices recently intorduced.

  • Fixed tooltips to correctly show the version of the software available on the web.

RS3 Installer

  • Added redistributable needed to manage the libraries to create files in Glyphworks (TM) s3t format, from nCode (TM).

3.50.26 - October 30th, 2020


  • Fixed two bugs to prevent crashes while plugging to the PC the SD cards with badly formatted data coming from Memory Modules.


  • Support and feedback requests window now guides users into inserting better information, including a valid subject and descriptive message.

  • Web updates tooltip now avoids showing “0.00.00” in dev releases.


  • Fixed bug about Close to VBatt and related Use internal pull down option for Digital Status channel.


  • Fixed zoom+drag in snap on mode.

  • Fixed recovery of lap ticks in time/distance plot in snap off and GPS time modes.

  • Reduced amount of internal logging calls to make RS3 slicghtly quicker.

  • Fixed and improved the way the delta works in time/distance mode.

  • Fixed the change of units of measure in RS3a.

  • Added min and max values in time/distance plot.

  • Time/distance plot saves plot resize dimensions (resets anyway after closing and reopening the time/distance plot).

  • The drag and drop among laps in the storyboard in “common time” and “snap on”, both in time and distance mode now behaves correctly.

  • The mouse cursor transforms itself into hand open/closed while dragging any plot element.

3.50.23 - October 7th, 2020


  • Fixed problem with computation of GPS position accuracy.

  • Improved the management of the colors.

  • Added the settings window for channels.

  • Improved the settings of the layout windows (mainly time/distance and track map panels).

  • Added the possibility to hide part of the layout panels using the space bar.

  • Added the math channels management.

  • Improved zooming capabilities.

  • Improved default layouts for movies.

  • Some bug fixes in the import of xrk and mov files, mostly for GPS data management.

  • General imporvements in analysis data engine, to have a better responsiveness.


  • PDM: Managing of keypad on CAN2 bus.

  • All devices: fixed issue about fuel consuption channel.

  • All devices: fixed issue about time channel formatting.

  • All devices: fixed issue about pwm frequency.

  • Added new function for measures of CAN Builder: Formatted Time and Signed Formatted Time.

  • Added management of FSW-R.

  • SmartyCam-HD, added new control.

  • Improvements in resources for OEM devices: Dallara and Norton.


  • Fixed crash in odometers window.

  • Bug fix that could prevent files from being downloaded, in case the character ‘:’ was used in the file or folder name.

3.50.19 - September 14th, 2020


  • Fixed crash while closing RS3 with a device connected

  • Fixed tooltip and lists flickering


  • Fixed parsing problem while downloading data from devices

3.50.17 - August 27th, 2020


  • Improved graphics for Channels List

  • Managing of black background

  • Fixed bug in import of xrk files

  • Fixed bug in import of drk files

  • Fixed bug in import of mov files

  • Fixed bug in import of tqm files

  • Import of files in analysis doesn’t generate tmp files in the original folder, this to help in case the original folder is shared on the cloud

  • Improved drawing of web maps, including small arrows to represent motion direction

  • Moved the login button a little bit to left in order to avoid problems due to the fact that it resizes

  • Introduced the possibility to share profiles (within all the instances of a single user, not among users)


  • Managed the download into the proper, user selected, folder, in case of download from SD cards or (only for the braves) from SmartyCamHD

  • Fixed export of lap times table in MatLab format


  • A number of minor bug fixes for PDM configuration

  • Fixed update in dialog previw of alarm conditions: changing priorities, the preview dialog was not updated

Web Updates

  • A couple of fixes in the representation of version number

  • Fixed small memory leak (few bytes) in the download of releases


  • Improved some logs in order to avoid false positives on error logs

  • The login window now tells you also if you can’t login due to mail not confirmed

  • Added Cue Banner for edit boxes when used as Search Box text fields

3.50.10 - August 10th, 2020


  • Bugfix in PDM configuration: calculated or precalculated gear channel wasn’t properly managed.

  • Bugfix in PDM configuration: if an alarm implied a condition upon an invalid channel, and that channel was set to valid, the alarm wasn’t properly working.

3.50.09 - August 3rd, 2020


  • Login: improved management for failed logins, now RS3 warns users for either bad user-name/password or mail not confirmed.

  • Bugfix: in the login password we realized that the special character tilde ‘~’ was managed in website account while wasn’t managed in RS3. We fixed RS3 in order to manage it (some users reported issues).

  • Bugfix: fixed parsing of mov files while downloading.

  • Analysis import window now better informs users in case a mov file can’t be imported, this as we noticed from feedbacks that the most of these cases were due to either missing metadata in mov or no GPS signal in metadata.

  • Database preview window, added some information in the advanced info window, to know the firmware versions of all the slave units used to generate the xrk files.


  • added new user fonts for display pages.

  • Bugfix: upon changing the expansion serial number in a configuration, some alarms and other minor features, could stop working.

3.50.08 - July 27th, 2020


  • Bugfix: there was cases for which the feedbacks couldn’t be sent (the ‘send’ button getting red).

  • Improvement: added the possibility to upload files to AiM.

  • Improvement: added the mamagement of dragsters ‘tracks’ for the new Junior Dragsters M5-660.

  • Bugfix: in RS3A, the saving of profiles didn’t properly manage windows that were closed before saving.

  • Bugfix: there were cases in which some samples twins with reversed timestamps in the xrk files generated a bad computation of distance and from here an erratic speed trace in the plots.

  • Bugfix: there were cases in which the session file was showing a different number of laps if imported into RS2A or RS3A.

  • Bugfix: there were cases in which the 25 or 15 FPS setting on the SmartyCam forbade a correct sync with xrk files.

  • Bugfix: the download window for the SmartyCam (very rarely used, as normally download happens through SD card) could wrongly show a message saying ‘SD card missing’ hence showing an empty mov file list.

  • Bugfix: the download of mov files from the SD card didn’t copy the downloaded files into a different folder.

  • Bugfix: Changing comments into the session properties window didn’t work for mov files.

  • Bugfix: there were cases in which importing sessions the comments eventually in it were not correctly imported.

  • Bugfix: there were cases in which all shown laps became of the same color.

  • Bugfix: there were cases in which importing sessions with no GPS lead to a software crash.

Configuration - PDM

  • Bugfix: there were cases in which a condition related to an invalid channel, reset to valid channel, was no more managed by device.

  • Bugfix: in PDM Gear Calulated/Precalculated channel was not correctly managed by device.