AIM Racing Data Power - Sprint Cars and Midgets

Home page > Sprint cars & Midgets

An EVO4 connected to a MyChron3 Dash is the perfect solution for Midgets and Sprint Cars alike.
Get all of your traditional instrumentation, water temperature, oil pressure and RPM.
Along with the added features such as lap times and the ability to determine on track air fuel ratio, at every RPM, just like your engine builder does at the Dyno. Take the guesswork out of pill and bypass adjustments.
No more mechanical sending units that slow down an engine change. Electrical sending units can be unplugged in seconds with no need to take out your whole gauge cluster.
Inexpensive senders can be pre mounted in your spare motor.

EVO4
The EVO4 is a simple way to get the information you need quickly between races and the information to diagnose a problem when things go wrong.

It comes complete: with 5 fully configurable analog channels.
The integrated GPS provides lap timing and track mapping without need for any track side beacon.
A 3-axis accelerometer gives you the ability to see "G" forces and visualize changes in the cars attitude during cornering.
The EVO4 gives the driver and crew chief key information for best engine tuning and critical insight as to suspension changes.
The EVO4 provides not only information coming from the sensors, but also any data coming from compatible Engine Control Units (ECU’s).

Modular: CAN output connects EVO4 to all AIM products, including the easy-to-use MyChron3 Dash.
Moreover EVO4 can be connected to MemoryKey that can be easily removed. The data can then be downloaded to your PC and reviewed with privacy.

EVO4 is supplied with Race Studio 2 software, the powerful tool for configuration and analysis that allows the user to customize the logger according to its needs and to display all data on a PC in quick and easy to read tables, graphs, histograms, etc.

MyChron 3 Dash
The MyChron3 Dash is the perfect light weight replacement of the mechanical gauges. You can choose what sensors to view along with RPM, speed, and lap times. Four fully configurable alarm warning lights can be set to your needs.

The MyChron3 Dash, which is completely configurable, allows you to instantly see all data sampled by the logger on each lap:

	Speed

	RPM (digital value and graph bar)

	RPM programmable warning lights

	Up to 4 configurable channels, water, oil, fuel etc.

	4 programmable alarm lights

	Lap time

	Max RPM for each lap

	Best lap

	GPS signal status (if present)

The images below show (left) the display main page in recording mode and (right) GPS diagnostic page reached using “VIEW” button:

and visible in sequence:


	Digital RPM value

	Best lap time

	Speed (226 Km/h in the above figure)

	GPS Signal status

	Lap and split settings

visible two by two (on the first and on the second page), pressing ">>" button.
In the above figure the shown channel is a temperature and T (field T1) appears beside the channel value.
In case the channel shown is a pressure letter P (field P1) appears beside the channel value; in case other kind of channels are sampled the display shows only a numeric identifier.